450mm Impeller
Plate Axial Fans with a 450mm Impeller.
Commercial plate axial extractor fans. One of the most common varieties of fans, plate axial fans are normally mounted on a wall and vent straight outside. The size offered is diameter across the blades, the overall size (including the plate) is slightly larger. (See data-sheets.) A WSK gravity shutter is normally mounted externally. Available in single and three phase versions and most are speed controllable. Not normally used with ducting, for this use a cased axial fan type. All fixings available. Any questions or advice please contact us.
Commercial plate axial extractor fans. One of the most common varieties of fans, plate axial fans are normally mounted on a wall and vent straight outside. The size offered is diameter across the blades, the overall size (including the plate) is slightly larger. (See data-sheets.) A WSK gravity shutter is normally mounted externally. Available in single and three phase versions and most are speed controllable. Not normally used with ducting, for this use a cased axial fan type. All fixings available. Any questions or advice please contact us.
Displaying 1 to 24 (of 33 products)
AW Sileo EC Plate Axial Fan - Single Phase - 450mm
£ 688.87
Axial fans of the range AW EC Sileo are driven by high efficient, energy saving EC-external rotor motors. The power electronics is integrated in the motor casing/terminal box. All motors are suitable ...
Dynair QCM 454 T - 3 phase
£ 314.99
The QCM series are axial fans suitable for application on wall or panel in residential, commercial and industrial building. The series consists of 10 models with impeller diameter from 200 to 700 mm (...
Elta SCP450-1EC - IP55
£ 711.54
Range of High Energy Efficiency Motors
Single Phase 450mm Plate fan- Duty: 7,336 m3/hr.
Running power at best efficiency point - 424W
Peak current 3.99A
Intelligent Design
Compact low profile d...
Elta SCP450/4-1AC - IP55
£ 379.84
Single Phase 450mm Plate fan- Duty: 5230 m3/hr
Running power at best efficiency point - 250W
Peak current 1.62A
Featuring Elta's high efficiency Series 1 impeller, the Compact SCP makes light work ...
Elta SCP450/4-3AC - IP55
£ 358.44
Three Phase 450mm Plate fan- Duty: 6138 m3/hr
Running power at best efficiency point - 373W
Peak current 0.68A
Featuring Elta's high efficiency Series 1 impeller, the Compact SCP makes light work o...
Elta SPA450/4-1AC - IP54
£ 394.86
Single Phase 450mm Plate fan - Duty: 7131m3/hr.
Running power at best efficiency point - 545W
Peak current 2.45A
The Raptor SPA incorporates the Ziehl-Abegg FE2owlet aerofoil profiled impeller. Bot...
Elta SPA450/46-3AC - IP54
£ 375.30
Three Phase 450mm Plate fan - Duty: 7192/5835 m3/hr.
Running power at best efficiency point - 538/380 W
Peak current 1.08/0.68 A
The Raptor SPA incorporates the Ziehl-Abegg FE2owlet aerofoil profil...
HCFB/4-450mm plastic impeller plate fan
£ 394.42
Plate Axial Fan - HCFB - 4 Pole
This is the plastic bladed version, which are normally on a 2-3 week lead time. The more readily available version is the metal bladed HCBB which are normally in stock...
HCFT/4-450mm plastic impeller plate fan
£ 419.55
Plate Axial Fan - HCFT - 4 Pole
This is the plastic bladed version, which are normally on a 2-3 week lead time. The more readily available version is the metal bladed HCBT which are normally in stock...
Helios HQW-450/4 - IP55
£ 475.07
Helios 450mm, 4 pole, single phase wall fan with square plate with inlet cone.
Casing
Manufactured in galvanised sheet steel. Also an additional two-layer finishing in papyrus white.
Specificati...
Helios HQW-450/6 - IP55
£ 480.32
Helios 450mm, 6 pole, single phase wall fan with square plate with inlet cone.
Casing
Manufactured in galvanised sheet steel. Also an additional two-layer finishing in papyrus white.
Specificati...
HRB/4-450-30-APN
£ 310.00
HRB/4-450-30-APN
Single phase axial fan without plate. Often used on generators, aircon units etc....
HRB/4-450-35-BPN
£ 337.74
HRB/4-450-35-BPNSingle phase axial fan without plate. Often used on generators, aircon units etc....
HRT/4-450/35-BPN
£ 325.00
HRT/4-450/35-BPNThree phase axial fan without plate. Often used on generators, aircon units etc....
HXP450/4-1 - 4 Pole - Single Phase
£ 423.20
Plate Mounted Axial Flow Fan
With a heavy duty construction, the HXP range is a high quality, hard working range of propeller fans designed to pass large volumes of air with higher efficiencies to ...
HXP450/4-3 - 4 Pole - Three Phase
£ 423.20
Plate Mounted Axial Flow Fan
With a heavy duty construction, the HXP range is a high quality, hard working range of propeller fans designed to pass large volumes of air with higher efficiencies to ...
HXP450/6-1 - 6 Pole - Single Phase
£ 423.20
Plate Mounted Axial Flow Fan
With a heavy duty construction, the HXP range is a high quality, hard working range of propeller fans designed to pass large volumes of air with higher efficiencies to ...
HXP450/6-3 - 6 Pole - Three Phase
£ 423.20
Plate Mounted Axial Flow Fan
With a heavy duty construction, the HXP range is a high quality, hard working range of propeller fans designed to pass large volumes of air with higher efficiencies to ...
Hydor HPA450/4-1A
£ 198.49
Axial flow plate fan for wall mounting
Max Airflow m3/s: 1.466
Speed r/min: 1339
Max Absorbed Current: 1.34
Motor Power KW: 0.303
Sound Level dBA @ 3m: 68
IP Rating; IP54
For use in th...
Hydor HPA450/6-1A
£ 198.49
Axial flow plate fan for wall mounting
Max Airflow m3/s: 0.915
Speed r/min: 919
Max Absorbed Current: 0.53
Motor Power KW: 0.119
Sound Level dBA @ 3m: 51
IP Rating; IP54
For use in the...
Soler & Palau - HCBB/4-450/H -IP65
£ 366.03
Plate Axial Fan - HCBB - 4 Pole - 450mm - Single Phase
7180 m3/hr
The COMPACT plate mounted series of plate axial fans are specifically designed to offer a high specification and reliable air movi...
Soler & Palau - HCBB/6-450/H - IP65
£ 368.04
Plate Axial Fan - HCBB/6-450/H - 6 Pole - Single Phase
4,400 m3/hr, Max Power Absorbed 178W.
The COMPACT plate mounted series of plate axial fans are specifically designed to offer a high specific...
Soler & Palau - HCBT/4-450/H - IP65
£ 358.31
Three Phase Compact Plate Axial Fan - HCBT - 4 Pole - 450mm
This is three phase, single phase also available.
6310 m3/hr, 511W Motor.
The COMPACT plate mounted series of internal rotor motor fa...
Displaying 1 to 24 (of 33 products)
1 x 204x60mm Rectangular to 100mm Round Adaptor2 x 2mtr Round Ducting - 100mm2 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter2 x BF VVX-200 - Villavent Filter1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 315mm Spigot1 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Etaline 315mm - D2 01 3 Phase1 x Soler & Palau TCBT/4-800/K - IP651 x Ancillary Pack for SLC-6301 x Ancillary Pack for SLC-3151 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x DPD SAT Delivery Surcharge1 x Spiral Ducting Additional Courier Surcharge1 x Ancillary Pack for SB-Biflow 400 model1 x Nordik International Plus 90/36 - Ceiling Sweep Fan Range1 x CTI CVA-N 450 Outdoor cover for CVAB/T Fans1 x 150mm Round Connector with Damper1 x Metal Inline Fan - VENT-125NK1 x 100mm Round 45 Degree Bend1 x ERR 12/1 Centrifugal inline fan1 x 1mtr Round Ducting - 100mm1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x CBT-100N Centrifugal1 x HRST/6-800/28-AQ C21 x Soler & Palau TCBT/4-355/H - IP441 x Elta Wall Cowl SWC35/401 x Etaline 280mm1 x Elta SLC400-1EC -IE5 Motor- IP551 x Helios DDF-250 Roof Cowl1 x Soler & Palau - Contra Rotating TCBTx2-500 - IP651 x Compact SCD500/4-1AC1 x DV-ROF-V-315 Roof mounted unit1 x Raptor SDA500/46-3AC1 x Elta Turboflow-TF - 500mm - Single phase1 x Jetflow-HIT Metal inline - 125mm1 x 7-Day Digital Time Switch - TCK7D-6A1 x Acopel F400-225/1601 x ACO3/BD Changover Panel (Three Phase)1 x Elta Cased Axial Flange - 400mm1 x CBS-130 Outlet Flange for CBT-1301 x CBS-80 Outlet Flange for CBT-801 x Acopel F400-630/1601 x FSD-TD 225mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x ACOFR9A-ADS-VFC - Automatic Duty Share Changeover panel1 x Purlin Box 800 for RAW Cowls1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x DS-2 2-Speed Switch (3 Phase)1 x ASSG/F 500-560 Flex. conn. DVG1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x CCpro 40 (1CC9402) Long Casing Extension1 x JPA-560 Accessory Adapter Plate1 x CFDM-125 Circular Twin Blade Fire Damper1 x ACO3/B Changeover Panel (Three Phase)1 x Control with reverse - CR3001 x Acopel F400-250/1601 x Etamaster EM 150 L EC 01 inline mix-vent fan1 x PRIO 400 EC, Axial circular duct fan - EC motor1 x Impeller Side Guard - 560mm1 x Impeller Side Guard - 450mm1 x Helios GigaBox 630mm GBD 630/6/6 centrifugal1 x Impeller Side Guard - 350mm1 x Ducting Reducers Short - 315mm-200mm1 x Etaline 400mm D2-01 3-phase1 x Metal Inline Fan - VENT-160NK1 x Elta SLC630/4A-3AC - IP551 x Classic SAX30/12ARB Wall Mounted1 x 220x90mm Double Airbrick Adapter1 x Soler & Palau TCBT/4-630/H - IP651 x Circular Inline Silencers - 600mm - 600mm1 x 220x90mm Flat Channel Connector1 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x AMD-630/2 - High Performance Cased Axial Fan1 x Elta Unpodded Silencer 1D-800mm1 x 220x90mm 45 Degree Horizontal Bend1 x Elta Turboflow-TF - 630mm - Single phase1 x Elta Unpodded Silencer Melinex 1D-450mm1 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x VKS 355-500 Automatic shutter1 x Multiflow SMB550/4-1AC1 x Raptor SDA250/4-1AC1 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x Etaline 450mm -EC (Three Phase)1 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x CBMT/Q 315-54 1 HEATER KIT1 x F7/G4 filter kit for IDEO HR unit1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x CADB/T-HE PRO-REG Series2 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x Soler & Palau - HXBR/4-355/H - IP541 x Belt Drive Cased Axial Fan - 560mm - L version1 x Etaline 355mm - E2-011 x AKOR Mounting Plate for GD model(VIM166423)1 x Elta Turboflow-TF - 450mm - Single phase1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Elta Turboflow-TF - 560mm - Single phase1 x HCFB/4-355mm plastic impeller plate fan1 x EC-Vent control board1 x HRT/4-400-BPN1 x Hydor HPA400/4-1A1 x Helios HQW-400/6 - IP551 x 150mm Round 90 Degree Bend1 x EuroSeries (ESP) - Plate Mounted Axial Fans 400-141 x Spare filter Set for Energi Sava 300 & 400 HR unit1 x Synthetic Air Filter Media - 6mm x 2mtr x 5mtr Roll1 x Spare filter for Energi Sava 380 HR unit1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x 100mm Round Connector with Damper1 x VTR 500 STD Filter Kit1 x Spiral Ducting 1 meter - 630mm1 x M8 x 3M Z/P Studding1 x Ducting 90 Degree Bend - 630mm1 x Duct Split Rings (Pair) -560mm1 x MFL-160 G4 Filter Box1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Spigot plate - 560mm1 x G4 duct mounted panel filter - 296 x 296 x 22mm1 x Flanged Spigot - 180mm1 x LBFR 400 F7 Grade Replacement Filter (2 Pieces)1 x Ancillary Pack for SLC-5001 x Spiral Ducting 3 Meters - 560mm1 x Male Ducting Connector - 630mm1 x U42K Screws for duct1 x AW 650 D6-2-EX Explosion Proof Axial Fan - ATEX1 x Shoed T Piece Un-Equal -630mm-500mm
Best sellers
Reviews
Duct Mounted Inline Filter - EU4
£ 41.95
Well made and robust, but it was not use for my application ...