800mm Impeller
Plate Axial Fans with a 800mm Impeller.
Commercial plate axial extractor fans. One of the most common varieties of fans, plate axial fans are normally mounted on a wall and vent straight outside. The size offered is diameter across the blades, the overall size (including the plate) is slightly larger. (See data-sheets.) A WSK gravity shutter is normally mounted externally. Available in single and three phase versions and most are speed controllable. Not normally used with ducting, for this use a cased axial fan type. All fixings available. Any questions or advice please contact us.
Commercial plate axial extractor fans. One of the most common varieties of fans, plate axial fans are normally mounted on a wall and vent straight outside. The size offered is diameter across the blades, the overall size (including the plate) is slightly larger. (See data-sheets.) A WSK gravity shutter is normally mounted externally. Available in single and three phase versions and most are speed controllable. Not normally used with ducting, for this use a cased axial fan type. All fixings available. Any questions or advice please contact us.
Displaying 1 to 19 (of 19 products)
AW Sileo EC Plate Axial Fan - Three Phase - 800mm
£ 2,074.09
Axial fans of the range AW EC Sileo are driven by high efficient, energy saving EC-external rotor motors. The power electronics is integrated in the motor casing/terminal box. All motors are suitable ...
Elta SCP800/6/8-3AC - IP55
£ 941.59
Three Phase 800mm Plate fan- Duty: 20,199 m3/hr
Running power at best efficiency point - 990W
Peak current 2.35A
Featuring Elta's high efficiency Series 1 impeller, the Compact SCP makes light work...
HCFT/4-800mm plastic impeller plate fan
£ 1,305.93
Plate Axial Fan - HCFT - 4 Pole
This is the plastic bladed version, which are normally on a 2-3 week lead time. The more readily available version is the metal bladed HCBT which are normally in stock...
HCFT/6-800-H plastic impeller plate fan
£ 790.15
Plate Axial Fan - HCFT - 6 Pole
This is the plastic bladed version, which are normally on a 2-3 week lead time. The more readily available version is the metal bladed HCBT which are normally in stock...
HRT/6-800/28-BZN-68C
£ 523.69
HRT/6-800/28-BZN-68C
Three phase axial fan without plate. Often used on generators, aircon units etc....
HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase
£ 799.00
The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides...
HV Wall Mounted Belt Drive Fan 800mm 400V / 50Hz 0.75kW - Three Phase
£ 799.00
The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides...
Soler & Palau - HCBT/4-800/H - IP55
£ 1,321.90
Three Phase Compact Plate Axial Fan - HCBT - 4 Pole - 800mm - 3.0KW
This is three phase,
33,100 m3/hr, 4,595W Max Power Absorbed.
The COMPACT plate mounted series of internal rotor motor fans are...
Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP55
£ 1,338.75
Three Phase Compact Plate Axial Fan - HCBT - 4 Pole - 800mm - 3.0KW
This is three phase, THIS HAS FAN IS FORM B, (SUPPLY AIR)
33,100 m3/hr, 4,595W Max Power Absorbed.
LEAD TIME IS CURRENTLY AT L...
Soler & Palau - HCBT/4-800/L-AX - IP55
£ 733.16
Three Phase Compact Plate Axial Fan - HCBT - 4 Pole - 800mm - 1.5KW
This is three phase,
23,290 m3/hr, 2,632W Max Power Absorbed.
The COMPACT plate mounted series of internal rotor motor fans ...
Soler & Palau - HCBT/6-800/H - IP65
£ 790.15
Three Phase Compact Plate Axial Fan - HCBT - 6 Pole - 800mm
The COMPACT plate mounted series of internal rotor motor fans are specifically designed to offer a high specification and reliable air mo...
Soler & Palau - HXTR/12-800/28-A
£ 866.25
Range of three phase 12 pole plate mounted axial fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller.
This is the 800mm version, 11,803 m3/hr, Max Power Curre...
Soler & Palau - HXTR/6-800/H - IP54
£ 857.43
Range of three phase 6 pole plate mounted axial fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller.
This is the 800mm version, 24,380 m3/hr, Max Power Absorb...
Systemair AW Sileo 800-DS
£ 1,061.45
Three Phase Plate Axial fans by Ziehl Abegg (German) - Systemair AW Sileo 800-DS
22,255m3/h, 1,648W Motor, 6 pole
• speed controllable by voltage reduction, plus option of 2-step operation by ...
Systemair ZAP- 6pole - three phase -800mm - IP54
£ 1,023.95
This is the 800mm version, 22,752m3/hr, Max Power Absorbed 1,400W
The ZAP range of plate axial fans is based around the Ziehl-Abegg external rotor motor and an aerodynamically designed impeller to pr...
Displaying 1 to 19 (of 19 products)
2 x Ancillary Pack for SLC-6301 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC2 x Ancillary Pack for SB-CYL 400 model2 x Ancillary Pack for SB-Biflow 400 model1 x CBMT/Q 125-12 1 HEATER KIT1 x CBMT/Q 200-30 1 HEATER KIT1 x CBMT/Q 315-90 3 HEATER KIT1 x HRFD 400/4/2 Cased Axial Fan 400mm - 3 Phase1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Ancillary Pack for SB-Biflow 250 model1 x CCZ-404-T (three Phase)1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Elta Variable Speed Drive IP66 - 2.2KW2 x Belt Drive Cased Axial Fan - 630mm - H version1 x SLC040J2-A6/21 - High Performance Long Cased Axial Fan1 x Direct AM Delivery Surcharge1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT500/4-3AC1 x Pre 12:00 Delivery Surcharge1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x CBM 10/10 - 373watt - 6 Pole1 x MV EC 150 Multivent1 x CBM 10/8 6P 245W RE VR1 x Ancillary Pack for SB-Biflow 315 model1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x KD 315 L1 - High Performance Duct Fan1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x LINEO 250 QUIET1 x EM 250-E2M 01- Etamaster-2501 x Raptor SDA500/4-1EC1 x Helios GigaBox 450mm GBD 450 centrifugal - EC Motor1 x EB-100N S - Centrifugal Fan1 x Elta SLC500/4A-1AC - IP551 x DA12/9 Feet1 x "VX100" - Standard Bathroom Axial fan - 100mm1 x BDS 500/560 RA b/d shutter1 x CBT-100N Centrifugal1 x CBTR/2-451-4kw1 x Flanged Damper 019-0250-STD1 x VKS 355-500 Automatic shutter1 x Soler & Palau - HCBT/4-710/H - IP651 x BDS 800 RA b/d shutter1 x BDS 400/450 RA b/d shutter1 x Ancillary Pack for SLC-4501 x Hydor HPA400/6-1A1 x 2mtr Round Ducting - 150mm1 x Flexible PVC Ducting - 220x901 x Ancillary Pack for SLC-3151 x Soler & Palau TCBT/6-630/H - IP651 x Jetflow-HIT Metal inline - 250mm1 x Jetflow-HIT Metal inline - 315mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Raptor SDA630/6-1AC1 x 220x90mm 45 Degree Vertical Bend1 x Jetflow Silent SJMF-S 150-1EC1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-HW1 x CCpro 40 (1CC9402) Long Casing Extension1 x DDMP 09/07 Mounting Flange1 x Ancillary Pack for SLC-5601 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x Soler & Palau TCBB/6-710/L - IP651 x CC-710-2.2kw1 x Belt Drive Cased Axial Fan - 800mm - H version1 x Elta SCP250-1EC - IP551 x Elta Turboflow-TF - 500mm(A) - Three phase1 x Elta Turboflow-TF - 450mm - Single phase1 x Elta Turboflow-TF - 560mm - Single phase1 x Elta - HTS450/4-1 - Case Mounted Circulating Axial Fan1 x Hydor HPA450/4-1A1 x HXP450/6-1 - 6 Pole - Single Phase1 x Elta SLC450-1EC -IE5 Motor- IP551 x Elta SLC560/4A-3AC - IP551 x Gorilla HVLSX701 x Airbrick Grille with flange - 204 x 60mm1 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x ELTA - Single Phase Transformer 10amps1 x ELM 25 EX Flexible Cuff for ERM 2501 x HRT/6-630/30-BPN1 x Elta Unpodded Silencer 1D-560mm1 x Elta Unpodded Silencer 1D-800mm1 x HRB/6-560-35-APN-C1 x JPA-560 Accessory Adapter Plate1 x Elta Unpodded Silencer 1D-250mm1 x Elta SPA560/4-1AC - IP541 x Purlin Box 350 for RAW Cowls1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 250mm Spigot1 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x GXC6EC - High Performance Extract Fan1 x Duct Split Rings (Pair) -560mm1 x ACO 149-ACO1/EDV1 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x BF VVX-200 - Villavent Filter1 x Spiral Ducting 1 meter - 560mm1 x Helios AV200 External Wall Fan1 x Male Ducting Connector - 560mm1 x BFR 100-160 Coarse 50% Filter
Best sellers
Reviews
Duct Mounted Inline Filter - EU4
£ 41.95
Well made and robust, but it was not use for my application ...