• Model:PPF4

PPF4 - Positive Pressure Supply Fan

£ 643.93 (excl. VAT)

£ 772.72 (inc. VAT)


Positive pressure ventilation provides effective, draught free ventilation, prevents condensation forming and reduces radon, the unit is easy to install on wall or ceiling - the PPF4 can be used both in the refurbishment of older properties where condensation is a particular problem as well as in new build.

• Positive input ventilation for domestic properties to 200m³
• Whole House Ventilation System
• Low Noise Levels
• Easy to install on wall or ceiling
• Extremely Low Running Costs

The PPF4 introduces air into the dwelling to create a positive pressure, Fresh air is drawn in from outside, filtered and introduced into the living areas via a single grille.

The fresh air circulates throughout the building giving draught-free ventilation and eventually dissipates via natural leakage, the unit runs continuously to provide a gentle influx of fresh air, maintaining a healthy and comfortable environment. Since the moisture content of the air outside is normally lower than that indoors, the level of humidity is reduced, helping to eliminate the damaging effects of condensation.

A PPF4 allows extra security - there is no need to open windows, the noise level is extremely lo and can be Wall or ceiling mounted.

The system is very economical and can cost less than £12 per year to run.

TECHNICAL FEATURES
• For domestic properties up to 200m3
• Easy wall, cupboard or ceiling installation - can be fitted horizontally or vertically.
• Choice of 3 speed levels (set at installation)
• Robust construction - steel cabinet lined with acoustic material - end covers from ABS plastic, and with white outer cover.
• Motor mounted on sealed for life self lubricating bearings
• Thermal overload protection
• Maximum ambient temperature 40ºC
• Complete with fixing bracket
• Filtration to G3 standard.
• Easy to maintain - filter and motor/fan assembly can easily be accessed for cleaning (recommended approximately every six months) .
• 3 year warranty - 1 year parts and labour, 2 years parts only

PDF Files


PPF4 Specification Sheets


PPF4 Installation Information

1 x Ducting 45 Degree Bend - 560mm1 x ELTA - Single Phase Transformer 8amps1 x Duct Suspension Rings - 400mm1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-A 5.5kw1 x 204x60mm x 1m Insulated Rectangular Duct1 x FSAF500FTX 500 mounting feet (Pair)1 x Elta SCP400/4-3AC - IP551 x DV-ROF-V-315 Roof mounted unit1 x Male Ducting Connector - 1000mm1 x Ducting 30 Degree Bend - 1000mm1 x Ducting 45 Degree Bend - 1000mm1 x Ducting Y Piece - 1000mm1 x Duct Split Rings (Pair) -1000mm1 x Female Ducting Connector - 1000mm1 x CRHB-250N Ecowatt - Energy Efficient Roof Fan1 x 1mtr Insulated Round Ducting - 125mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Ducting 90 Degree Bend - 560mm1 x ELTA - Single Phase Transformer 4amps1 x Elta 3 Amp Electronic single phase speed controller.1 x 220x90mm x 2m Insulated Rectangular Duct1 x CRHB/6- 630mm Roof mounted Fan - Horizontal discharge1 x 220x90mm Elbow Plenum with 160mm Spigot1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Spiral Duct Grille Termination - 400mm1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Elta 6 Amp Electronic single phase speed controller with TK1 x Female Ducting Connector - 560mm1 x ELTA - Single Phase Transformer 10amps1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Duct Fast Clamps - 400mm1 x Spiral Ducting 3 Meters - 560mm1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x Ducting Y Piece - 400mm1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC1 x Ducting 15 Degree Bend - 560mm1 x Ducting T Piece Equal - 400mm1 x Duct Termination with Mesh - 560mm1 x Spiral Duct Grille Termination - 560mm1 x Ducting 90 Degree Bend - 400mm1 x 125mm Insulated 45 Degree Bend1 x CRHT/4-315 N Roof mounted Fan - Horizontal discharge1 x Ducting T Piece Equal - 560mm1 x 125mm Insulated Round T-Piece1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x Spigot plate - 560mm1 x Elta 10 Amp Electronic single phase speed controller.1 x Curved boot - 560mm1 x Spiral Ducting 1 meter - 560mm1 x 220x90mm x 1m Insulated Rectangular Duct1 x ELTA - Single Phase Transformer 16amps1 x 125mm Insulated 90 Degree Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x ELTA - Single Phase Transformer 12amps1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT350/4-3AC1 x 204x60mm to 125mm Insulated Straight Adapter1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...