• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Spiral Ducting 1 meter - 315mm2 x Jetflow-HIT Metal inline - 200mm1 x Prio 500 3 Phase - 230V or 400V - 50Hz1 x Elta Cased Axial Flange - 710mm1 x Soler & Palau - HCBT/4-500/H - IP651 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Etaline 250mm1 x Ducting T Piece Equal - 710mm2 x Metal Inline Fan - VENT-200NK1 x Elta Standard Ambient Flexible Connector - 315mm2 x Etaline Max-Fan - 315mm - E2 011 x Jetflow-HIT Metal inline - 100mm2 x Jetflow-HIT Metal inline - 250mm1 x Jetflow-HIT Metal inline - 125mm1 x AL 315 Mounting Feet (Pair)1 x Spigot plate - 315mm1 x Metal Inline Fan - VENT-150NK1 x Etaline 315mm - E2 03 (Low Power Version)1 x Etaline 280mm1 x K 315 L Sileo Metal Tube Fan1 x Jetflow-HIT Metal inline - 315mm1 x Elta Variable Speed Drive IP66 - 0.75KW1 x FUM Mounting Foot for ERM 2501 x Male Ducting Connector - 250mm1 x DA7/7 Feet1 x Classic SAX30/12AR Window/Wall Mounted1 x Metal Inline Fan - VENT-250NK1 x Male Ducting Connector - 300mm1 x Spiral Ducting 3 Meters - 300mm1 x FU 15 40 Frequency Inverter1 x ELTA - Three Phase Transformer 3amps1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x FU 075 52 Frequency Inverter (IP20)1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x CBP-12/12 RC LOW PRESSURE CENTRIFUGAL FAN1 x Soler & Palau TCBB/4-450/H - IP651 x Elta Variable Speed Drive IP66 - 4.0KW1 x Soler & Palau TCBB/4-315/H - IP441 x Soler & Palau - HXBR-250 ECOWATT - IP441 x Jetflow Silent SJMF-S 200-1EC1 x MV-Silent 350 Bathroom Extractor Fan Kit - Standard - No Timer1 x ERR 31/1 Centrifugal inline fan1 x Etaline 355mm - E2-011 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN2 x FU 22 25 Frequency Inverter1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x DA 15/15 Feet1 x Three Phase Transformer controllers - RMT 8.0 Amp1 x Soler & Palau HXM-300mm1 x Ducting 45 Degree Bend - 710mm1 x Ducting 90 Degree Bend - 710mm1 x Impeller Side Guard - 250mm1 x CFI Lite 600 Carbon Filter1 x RUCK MTP 30, Stepped Speed control1 x Spiral Ducting 1 meter - 355mm1 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x Spigot plate - 710mm1 x Soler & Palau VFD-T inverter 5 amp IP541 x DA7/9 Feet1 x MFA-AR/AXC 315 mounting foot1 x Spiral Ducting 3 Meters - 125mm1 x Elta SCP450-1EC - IP551 x Soler & Palau TCBB/4-250/H - IP541 x CBP-18/181 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x DA12/9 Feet1 x AL 1000 D4 mounting Feet (Pair)
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...