• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Helios AV150 External Wall Fan1 x Metallic Kitchen Extractor - CK35N1 x ECO-500 Kitchen Extract Fan1 x SWF-150 Sidewall Mounted Extractor Fan1 x SWF-150X Sidewall Mounted Extractor Fan1 x Plastic Kitchen Extractors - CK-60F1 x Spigot plate - 560mm1 x Acoustic MiniBox Fan - MINI-BOX 2501 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x MD - Motor Protection Switch (3 Phase)1 x Flexible PVC Ducting - 220x901 x SWF-100X Sidewall Mounted Extractor Fan1 x Commercial Thermostat - TH161 x CBA-80 Inlet Flange for CBT-801 x Male Ducting Connector - 560mm1 x ELTA - Single Phase Transformer 2amps1 x JBR N - 560 Flange to suit CRHB roof fans1 x Spiral Ducting 3 Meters - 710mm1 x Spiral Ducting 3 Meters - 80mm1 x Ducting 90 Degree Bend - 710mm1 x Elta SLC630/4B-3AC - IP551 x Spiral Ducting 3 Meters - 355mm1 x Ducting T Piece Equal - 560mm1 x DDMP 10-10 FLANGE1 x Ducting T Piece Equal - 500mm1 x Soler & Palau TCBT/6-800/K - IP651 x Dektite Combo Pipe Flashing - DC210REC1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-12000/560 ND - Pack 51 x Binks Bullows - Spray Booth Filter1 x Elta SLC1000/4B-3AC - IP551 x Soler & Palau TCBT/4-800/L - IP651 x Helios GigaBox 500mm GBW 500/4 T120 centrifugal1 x KBD- outlet mounting flange for CRMT 3151 x CBS-130 Outlet Flange for CBT-1301 x Elta SLC1000/6B-3AC - IP551 x Soler & Palau TCBT/6-800/G - IP651 x Spiral Ducting 1 meter - 560mm1 x Elta Wall Cowl SWC35/401 x Belt Drive Cased Axial Fan - 1000mm - H version1 x Flanged Spigot - 315mm1 x Ducting 45 Degree Bend - 560mm1 x Elta Cased Axial Flange - 250mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...