• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Binks Bullows - Spray Booth Filter1 x Flanged Spigot - 500mm1 x Duct Termination with Mesh - 500mm2 x TUNE-R-80-3-M2 - Control Damper1 x Stainless Steel Single Blade Regulating Damper -150mm1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x TD160 Mixvent - 100mm - TD160-N Standard1 x TUNE-R-250-1-M2 - Control Damper1 x TUNE-R-250-3-M1 - Control Damper2 x TUNE-R-180-2-M5 - Control Damper1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x TUNE-R-80-3-M0 - Control Damper (NO ACTUATOR)1 x Ducting Y Piece - 500mm1 x TUNE-R-80-2-M3 - Control Damper1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator1 x Pressed Ducting Saddle - 500mm1 x TUNE-R-100-3-M2 - Control Damper1 x HD Series Control Damper - 3000mm X 1500mm1 x Ducting 15 Degree Bend - 500mm1 x Motorised Volume Control Damper - 400mm1 x Silentub - STUB 1001 x TUNE-R-400-3-M0 - Control Damper1 x OBD 450x450 - for use with 4WAY-5951 x Insulated extract Plenum 6+11 x Ducting 60 Degree Bend - 500mm1 x Differential Pressure Switch - 20 - 300 Pa - IP651 x SPI-250 C Iris damper1 x SPI-125 C Iris damper1 x Spiral Ducting 1 meter - 80mm1 x Soler & Palau VFD-T inverter 6.8 amp IP541 x ELTA - Three Phase Transformer 3amps1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 7 Amps1 x Female Ducting Connector - 150mm1 x RTRD - Three Phase Speed Controller - 4 Amp1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Ducted Outlet Option for H14 - HAP500
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...