• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Female Ducting Connector - 150mm1 x Rosenberg DQ 1000-8 plate axial fan1 x EM 200-E2M 01- Etamaster-2001 x Transformer (silent) speed controller - RE 1.5 Amp1 x Female Ducting Connector - 200mm1 x MTS10- extractor fan 3 step switch1 x Stainless Steel Ducting T Piece - 250mm1 x Elta Wall Cowl SWC35/401 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Stainless Steel HU- Cowl - 250mm1 x Binks Bullows - Spray Booth Filter1 x Stainless Steel IL Flanged Spigot-400mm1 x Ducting Y Piece - 200mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 630mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 150mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Flanged Spigot - 200mm1 x Stainless Steel Duct Suspension Rings - SUR2001 x MTP 10, 10K, Speed control1 x Flanged Spigot - 315mm1 x Commercial Thermostat - TH161 x Ancillary Sealing Band - 200mm1 x HCFB/4-315mm plastic impeller plate fan1 x Male Ducting Connector - 150mm1 x Ducting T Piece Equal - 200mm1 x Soler & Palau VFD-T inverter 13 amp IP541 x Stainless Steel Duct Suspension Rings - SUR3151 x Stainless Steel Jet Cowl Ventilation Outlet - 250mm1 x 100mm Wall Duct - 350mm1 x Stainless Steel 316 grade HU- Cowl - 630mm1 x Spigot plate - 125mm1 x Spiral end cap - 200mm1 x Soler & Palau - HCFT/4-1000/H-X - IP551 x Male Ducting Connector - 200mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Flanged Spigot - 150mm1 x Stainless Steel Male Connector - 150mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 300mm1 x Stainless Steel Male Connector - 200mm1 x Ducting 30 Degree Bend - 200mm1 x Duct Quick Suspension Rings with Clasp - 200mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 400mm1 x Duct Suspension Rings - 250mm1 x Duct Fast Clamps - 200mm1 x Elta Wall Cowl SWC45/50
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...