• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Duct Suspension Rings - 250mm1 x Male Ducting Connector - 250mm1 x Ducting 45 Degree Bend - 355mm1 x Female Ducting Connector - 355mm1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x Spiral Ducting 1 meter - 355mm1 x CBMT/Q 200-54 1 HEATER KIT1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x RUCK MTP 50, Potentiometer1 x Soler & Palau VFD-M inverter 10 amp IP541 x 125mm Round Connector1 x MEV 160 & 300 Additional Spigots1 x DDMP 09-09 1F 1000W M6A1 DA51 x CBMT/Q 100-06 1 HEATER KIT1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x *VORT HRW 30 MONO Evo HCS - Single Room Heat Recovery Unit,1 x F7/G4 filter kit for IDEO HR unit1 x CBMT/Q 315-54 1 HEATER KIT1 x Male Ducting Connector - 160mm1 x 316 Grade Stainless Steel Flat Bar Flange - 400mm1 x CBMT/Q 200-30 1 HEATER KIT1 x Soler & Palau TCBB/4-250/H - IP541 x Ducting 90 Degree Bend - 100mm1 x CBMT/Q 160-15 1 HEATER KIT1 x Speed Controller - REB1-N1 x CBMT/Q 315-120 3 HEATER KIT1 x CTVB/4-315 Kitchen/High Temp Roof Fan1 x CBA-100 Inlet Flange for CBT-1001 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan1 x AKOR T3/7 Spare Motor1 x Helios SB-125-C SilentBox Acoustic Inline Fan1 x Singleflow SSDL125-1EC1 x GRA-100 External Grill by S&P1 x Spiral end cap - 200mm1 x TD1300 Mixvent - 250mm1 x Airvent ceiling fan controller1 x KVK SLIM 125 EC - Centrifugal Circular Duct Fan1 x Elta Quietflow Twin SQT200-1ECL1 x CBMT/Q 400-55 1 HEATER KIT1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x CBMT/Q 315-30 1 HEATER KIT1 x Duct Fast Clamps - 200mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...