• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x 1mtr Round Ducting - 125mm1 x 1mtr Round Ducting - 100mm1 x Ducting T Piece Equal - 100mm2 x 204x60mm to 125mm Insulated Straight Adapter1 x Ducting 90 Degree Bend - 315mm1 x Duct Quick Suspension Rings with Clasp - 150mm1 x 150mm Round Connector with Damper2 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x 100mm Wall Duct - 350mm1 x CBMT/Q 315-90 3 HEATER KIT1 x SAVE VSR 300 heat recovery unit1 x MTP 10, 10K, Speed control1 x 125mm Insulated 45 Degree Bend1 x Speed Controller - REB11 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220x90mm x 1m Insulated Rectangular Duct2 x 220x90mm x 2m Insulated Rectangular Duct1 x 125mm Round 90 Degree Bend1 x RDS 7 Helios Transformer Controller With Motor Protection1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Air Trak Heater-100mm1 x CBMT/Q 100-06 1 HEATER KIT1 x 220x90mm Insulated Rectangular T-Piece1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Ducting T Piece Equal - 630mm1 x 125mm Insulated Round T-Piece1 x High Temperature Flexible Connector - 063-800-PU2501 x Spiral end cap - 125mm1 x Ducting 45 Degree Bend - 355mm1 x Ancillary Pack for SB-Biflow 250 model1 x Flanged Spigot - 450mm1 x Female Ducting Connector - 150mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x HV Wall Mounted Belt Drive Fan 1000mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Etaline 250mm
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...