• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x 125mm Round 90 Degree Bend1 x 125mm Round Equal T Piece1 x Male Ducting Connector - 250mm1 x Helios HQW-200/2 - IP551 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x Kitchen Grease Filter - Mesh Type NON standard 195H x 597W x 47mm Actual1 x 110 x 54mm Vertical 45 Degree Bend1 x KBR/F 315D2 sm ext F4001 x KBR 315D2 IE2 Thermo fan1 x Smoke Extract Axial Fan Series AXC 315 (B)1 x MPS 225 D2 F4 301 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Belt Drive Cased Axial Fan - 560mm - L version1 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Elta Wall Cowl SWC35/401 x Duct Termination with Mesh - 315mm1 x Spiral Rapid Lock Clamp - 250mm1 x Ducting 45 Degree Bend - 315mm1 x Soler & Palau - HXBR/4-355/H - IP542 x Spiral Ducting 3 Meters - 250mm1 x Ducting 90 Degree Bend - 250mm1 x 110 x 54mm Horizontal 90 Degree Bend1 x 110 x 54mm Flat Channel Connector1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Flexible PVC Ducting - 110x541 x Rectangular Airbrick Adaptor1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x 110 x 54mm Horizontal 45 Degree Bend1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x 110 x 54mm Equal Horizontal T-Piece1 x 110 x 54mm Elbow Bend Male1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x ILHT/4-450 CC - High Temp Kitchen Duct Fan1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x Helios GigaBox 500mm GBW 500/4 T120 centrifugal1 x Helios VARW 500/4 - TK1 x Small High Temp Gas Blower - FET 3001 x Belt Drive Cased Axial Fan - 500mm - H version1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...