• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Flanged Spigot - 150mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x 1mtr Round Ducting - 125mm1 x Ducting 45 Degree Bend - 150mm1 x 125mm Insulated 90 Degree Bend1 x Spiral Ducting 1 Meters - 900mm1 x KBD- outlet mounting flange for CRMT 2801 x 220x90mm x 1m Insulated Rectangular Duct1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x CBM 9/7 4p 420W RE-VR1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Ducting 90 Degree Bend - 900mm2 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Curved boot - 900mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Elta SCP315-1EC - IP551 x Male Ducting Connector - 900mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220x90mm to 160mm straight adapter1 x CAB-160 ECOWATT Energy Efficient Acoustic Box Fan1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Elta Standard Ambient Flexible Connector - 315mm1 x Kitchen Extract Grille with Grease Filter - 450 x 150 - NO GRILL BOX1 x CTVB/4-315 Kitchen/High Temp Roof Fan1 x Acopel F400-355/1601 x Ducting 45 Degree Bend - 100mm1 x 204x60mm x 1m Insulated Rectangular Duct1 x 125mm Insulated 45 Degree Bend1 x 220x90mm Insulated Rectangular T-Piece1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Duct Fast Clamps - 400mm1 x Anti Vibration Duct Suspension Rings - 400mm1 x Transformer (silent) speed controller - RE 7.0 Amp1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x Acopel F400-315/1601 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x ACQ-150-12D Acoustic Inline Box Fan
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...