• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Elta SCP350/4-1AC - IP551 x VSR 300 Heat Recovery spare filter Kit. M5 extract & F7 supply.1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x VSR 500 Heat Recovery spare filter Kit. M5 extract & F7 supply.1 x Elta Wall Cowl SWC35/401 x Female Ducting Connector - 400mm1 x Villavent BF VR700 E and DC STD Filter Kit1 x Synthetic Air Filter Media - 6mm x 2mtr x 20mtr Roll1 x VTR 300 STD Filter Kit1 x Acoustic MiniBox Fan - MINI-BOX 2001 x Synthetic Air Filter Media - 6mm x 2mtr x 5mtr Roll1 x VTR 500 STD Filter Kit1 x Duct Mounted Filter Box - G4 Grade Panel - 200mm1 x Spiral Duct Grille Termination - 450mm1 x Female Ducting Connector - 150mm1 x Flanged Spigot - 200mm1 x Soler & Palau - HCBT/6-710/H - IP651 x Ancillary Pack for SB-Biflow 250 model1 x Elta SLC900/8-3AC1 x Ducting 90 Degree Bend - 400mm1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Duct Mounted Filter Box - G4 Grade Panel - 400mm1 x 125mm Insulated 90 Degree Bend1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Spiral Duct Grille Termination - 315mm1 x Spiral end cap - 450mm1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Helios GigaBox 315mm GBW 315/4 centrifugal1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x 125mm Insulated Round T-Piece1 x KD 315 L1 - High Performance Duct Fan1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Male Ducting Connector - 400mm1 x 220x90mm x 2m Insulated Rectangular Duct1 x ERR 31/1 Centrifugal inline fan1 x Transformer (silent) speed controller - RE 1.5 Amp1 x 220x90mm Insulated Rectangular T-Piece1 x 204x60mm 45 Degree Vertical Bend1 x Commercial Thermostat - TH161 x 1mtr Insulated Round Ducting - 125mm1 x EM 315-E2M 01- Etamaster-3151 x Ducting 90 Degree Bend - 450mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Etaline Max-Fan - 315mm - E2 011 x CBMT/Q 200-30 1 HEATER KIT1 x Curved boot - 450mm
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...