• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x 125mm - 150mm Round Reducer1 x Female Ducting Connector - 450mm1 x Helios HRFW 500/41 x Male Ducting Connector - 100mm1 x Ducting Reducers Short - 315mm-250mm1 x Ducting 90 Degree Bend - 500mm1 x Pulser Temperature control1 x Male Ducting Connector - 80mm1 x IR24-P - Presence detector1 x DTV200 - Differential Pressure Switch1 x Room Thermostat RT 0-301 x EC-Basic-T temperature1 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Ecor Pro Humidistat - EPHUM24DF1 x SCO2-A Ambient CO2 and Temperature Sensor1 x Spiral Ducting 3 Meters - 500mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Soler & Palau TCBB/4-500/H - IP651 x TDP-D Pressure Sensor with Display1 x Purlin Box 200/250 for RAW Cowls1 x TD1300 Mixvent - 250mm1 x K 315 L Sileo Metal Tube Fan1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x DPD SAT Delivery Surcharge1 x Spiral Ducting 1 meter - 400mm1 x Spiral Ducting 3 Meters - 315mm1 x G4 duct mounted panel filter - 190 x 190 x 47mm1 x CPTA-E Flush mounted PIR sensor with timer1 x Spiral Ducting 1 meter - 315mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX450/4-3B Three Phase1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Spiral Ducting 3 Meters - 80mm1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x BEAS-control module1 x Flanged Spigot - 315mm1 x Flanged Spigot - 250mm1 x Spiral end cap - 315mm1 x VSR 300 Heat Recovery spare filter Kit. M5 extract & F7 supply.1 x Spiral Ducting 3 Meters - 900mm1 x FSD-TD 630mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Villavent BF VR700 E and DC STD Filter Kit1 x Inverter VFKB 451 x CBP-DC 15/151 x 125mm Insulated 45 Degree Bend1 x 220x90mm x 2m Insulated Rectangular Duct1 x Filter Box With F7 Grade Bag Filter - 250mm1 x 1mtr Insulated Round Ducting - 125mm1 x Helios TSW 1.5 Amp Transformer speed controller1 x TecFire Intumescent Damper - Rectangular-100x100mm1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Duct Termination with Mesh - 250mm1 x Female Ducting Connector - 250mm1 x TecFire Intumescent Damper - Rectangular 400x400mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...