• Model:Tecflex800

PVC/Fabric Ducting 6Mtr- Tecflex 800

£ 21.34 (excl. VAT)

£ 25.61 (inc. VAT)

This new construction with the supporting steel wire helix now embedded between two layers of fabric produces approximately 10-25% less resistance.
It is also environmentally friendly; solvents are no longer the principle bonding agents. The estimated solvent reduction is over 90!
Sold in 6 meter lengths
Temperature Range - From -20°C to +70°C
Air Velocity- 25M/S maximum
Working Pressure - Maximum 2000 Pa

Suitable for use in high, medium and low pressure ventilation and air conditioning systems. It is also suitable for use in fume extraction systems. Due to the materials used in its construction Tecflex 800S is able to withstand repeated flexing without damage or kinking.
Tecflex 800S complies with the requirements of HVCA specification DW144.
The selection of an exceptionally durable fabric together with carefully controlled manufacturing techniques has resulted in a highly compressible, ultra flexible ducting.
This ducting compresses down to approximately 10% of its extended length - making connections in confined spaces considerably easier and reducing installation times.
Supplied in economical 6 metre lengths. However, if longer lengths are required, two lengths of the same diameter may be screwed together and secured with PVC Tectape to provide a permanent airtight joint.

Available Options

1 x Ducting Reducers Short - 355mm-315mm1 x Etaline 250mm1 x Flanged Spigot - 315mm1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x Ducting Reducers Long - 300mm-250mm1 x BDS 300/315 RA b/d shutter1 x Helios Condense Collector1 x JCA 560 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x EM30-24 Control Panel Commissioning Service1 x BDS 630/710 RA b/d shutter1 x Jetflow-HIT Metal inline - 100mm1 x Ducting Reducers Short - 315mm-250mm1 x Air Trak Heater-100mm1 x Ducting Y Piece - 315mm1 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x Binks Bullows - Spray Booth Filter1 x 110 x 54mm Equal Horizontal T-Piece1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Etaline 200mm1 x Female Ducting Connector - 150mm1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Duct Suspension Rings - 300mm1 x Acopel F400-560/1601 x Ducting 90 Degree Bend - 300mm1 x Flanged Spigot - 300mm1 x Male Ducting Connector - 300mm1 x Spiral Ducting 3 Meters - 710mm1 x Spiral Ducting 3 Meters - 1000mm1 x Spigot plate - 300mm1 x Curved boot - 300mm1 x Female Ducting Connector - 1000mm1 x Flanged Spigot - 560mm1 x Spiral end cap - 300mm1 x Female Ducting Connector - 710mm1 x BDS 350 RA b/d shutter1 x Acopel F400-200/1601 x BDS 500/560 RA b/d shutter1 x VKS 355-500 Automatic shutter1 x ACO 149-ACO1/EDV1 x Jetflow-HIT Metal inline - 200mm1 x Duct Termination with Mesh - 315mm1 x Spigot plate - 315mm1 x Mounting Feet (Pair) for SLC-560-060B-0560
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...