• Model:SDA350/4-1AC

Raptor SDA350/4-1AC

£ 446.50 (excl. VAT)

£ 535.80 (inc. VAT)

Raptor SDA350/4-1AC

The Raptor SDA is a short cased mounted axial fan and is normally mounted in ductwork applications.
It incorporates the Ziehl-Abegg FE2owlet aerofoil profiled impeller. Both strong and durable, this range also boasts low noise and increased efficiency levels.
Easy Installation
A fitted IP55 terminal box allows the fan to be positioned conveniently to incoming electrical inputs. Efficient Performance Aerofoil section, sickle shaped blades, with serrated trailing edges and winglets based on bionic insights.Corrosion resistance Specially treated against corrosion, powder coated with polyester epoxy paint in pastel beige (RAL 7032).
Controllability
A range of transformer voltage controllers used to provide five speed step control of single phase or three phase motors.
Energy saving
Extremely energy efficient as a result of EC technology, easy to commission, built in motor protection and compact in design to reduce casing sizes. AC external rotor motor variants also available.
Warranty
Each SDA has a 12 month warranty.
• 8 standard sizes from 250mm to 630mm
• Air volume flow rates up to 4.60 m³/s
• Static pressures up to 290 Pa
• Suitable for operating temperatures up to +70°C
• Available in AC & EC
Product Overview
RAPTOR SDA
Construction
Constructed from mild steel and suitably treated to ensure full corrosion protection. The guard is powder coated polyester epoxy paint finish in black (RAL9005). Fan casings are powder coated polyester epoxy paint finish in pastel beige (RAL 7032).
Motor
Motors are highly efficient, lightweight external rotor motors, insulated to Class F, with integral thermal overload protection.
Sizes 250-350 weatherproofed to IP44.
Sizes 400-630 weatherproofed to IP54.
All fans are suitable for use with a speed controller.
Impeller
The Ziehl-Abegg FE2owlet impeller has a unique serrated trailing edge which provides optimised flow and improved acoustics. The Aerofoil blades, complete with winglets, enable increased impeller efficiency.
Typical Applications
• Sports Halls
• Squash Courts
• Schools & Colleges
• Shops
• Retail Parks
• Commercial
• Kitchens
• Factories
• Industrial Units
• Warehousing
PDF Files


Data Sheet

2 x DDMP 10-08 3F 2210W M6A4 DG01 x CBT-100N Centrifugal1 x TUNE-R-200-3-M4 - Control Damper2 x CBM 12-12 1100w 6P Three Phase3 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x KBA- inlet mounting flange for CRMT 2252 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x DS-2 2-Speed Switch (3 Phase)3 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven2 x Round ceiling diffuser 250mm5 x SPI-100 C Iris damper1 x Electrostatic Precipitator - 1H x 3W4 x ACO8AC/EC AutoChangeover panel1 x CO2 Room Sensor - CO2-R1 x Helios RR-250-C Centrifugal inline fan4 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR4 x VTR 500 STD Filter Kit1 x CK-60F Kit1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x Round ceiling diffuser 200mm3 x IR24-P - Presence detector4 x Potentiometer EGH 01 - for DDMP Fans1 x SD-MUB Vibration pad set2 x CFI In-line 150 - Carbon Filter1 x EBM-Papst D3G133-BF05-14 Double inlet3 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x Duct Termination with Mesh - 100mm3 x KAD-355-F400 Rectangle Flexible Connector3 x AIRVENT speed control - AIR4019612 x CSB-60 Centrifugal fan4 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)4 x CBA-100 Inlet Flange for CBT-1002 x CBT-80N Centrifugal2 x Helios ZNE Electronic Fan Overrun Timer1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C3 x RDS 1 Helios Transformer Controller With Motor Protection1 x QPTW 250C Acoustic Twin Fan with Controller3 x KAD-225-F400 Rectangle Flexible Connector2 x Quietflow Twin SQTDCV250-1ECL1 x CCpro 40 (1CC9402) Long Casing Extension1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Lo-Carbon Silhouette 100T (Timer)1 x VEKA INT 2000/15.0-L1 EKO1 x Silent 300 CZ Design PLUS Extractor Fan1 x MTP 10, 10K, Speed control1 x KBA- Inlet Mounting 2801 x VA 9/2 T - High Temp Axial Fan,3 x 125mm Round Connector with Damper4 x Helios HQW-355/4 - IP554 x Duct Termination with Mesh - 150mm3 x FFR 355 Filter Cassette1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x WSD 100 (1060x1060x70)1 x ACO3TO-ADS-VFC-7.1A3 x Helios ESA-1 Surface mounted Speed Control 1amp4 x Duct Termination with Mesh - 450mm3 x ELTA - Three Phase Transformer 3amps4 x DDMP 10-10 1F 1000W M6A2 DA52 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Binks Bullows - Spray Booth Filter2 x Vent Axia Trickle & Boost Switch4 x 100mm Round Connector with Damper3 x Flat Roof Terminal -OFT 5 - Asphalt3 x DDMP 07/07 Mounting Flange3 x CBS-100 Outlet Flange for CBT-1003 x Elta 2 Amp Electronic single phase speed controller.1 x FRQ5-4A V2 Inverter Speed Controller1 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC2 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Speed Controller - REB161 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR3 x KBA- Inlet Mounting 3151 x Speed Controller - REB52 x CBM 7/7 147w 4P RE-VR2 x Elta SCP400/4-1AC - IP551 x Elta Variable Speed Drive IP66 - 7.5KW1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x TUNE-R-315-3-M4 - Control Damper2 x Comefri - TLZ 225 R - High Performance Scroll Fan1 x Purlin Box 800 for RAW Cowls3 x CBB-60N Centrifugal5 x DDMP 12-12 3F 5700W M6M0 DG71 x VKS 355-500 Automatic shutter1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x MEV300/160 Wireless Boost Switch - SWHWMEV2 x KBA- Inlet Mounting 1801 x TD Mixvent 1100/250 EEXEIIT31 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR2 x KBA- Inlet Mounting 2251 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x EC Trickle and boost module - IP563 x KBA- Inlet Mounting 2501 x Spare filter pack for Energi Sava 210 HR unit1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011572 x RUCK MTP 20, 10K, Speed control1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011582 x DPD 12PM Delivery Surcharge2 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x CBM 9-9 550w 4P VR (Open Motor)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x Speed Controller - REB2.5-N1 x DDMP 09/07 Mounting Flange3 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Run On Timer - 5s - 4hrs - RT5A1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Twinflow STDL315-1EC1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Silentub - STUB 1001 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x RDH Flange - 02501 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x Quietflow SQS250-1ECL - Centrifugal Box Fan2 x Flanged Damper 019-0560-STD1 x TUNE-R-200-3-M3 - Control Damper1 x Remote Timer Control - 13511 x Vent Axia Silent 100T (TIMER)1 x Mini Diffuser - 100mm1 x Round ceiling diffuser 300mm2 x Speed Controller - REB31 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Backdraught Shutters 039-SFSV-63/711 x CBB-80N Centrifugal1 x REB-CVF 0-10v Controller1 x UB47- Universal Insulated Terminal1 x 220x90mm x 1m Insulated Rectangular Duct1 x HXP450/6-1 - 6 Pole - Single Phase1 x Vent Axia T-Series Wall Model TX6WL1 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x DDMP 12-09 1F 1800W M6A4 DA81 x AL 1120 Mounting Flange1 x Helios PA10 Speed Potentiometer1 x Elta Quietflow Twin SQT150-1ECL1 x Impeller Side Guard - 450mm2 x Duct Termination with Mesh - 400mm1 x Elta HXP 800mm 6-Pole (Three Phase)1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan2 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Two Speed Switch - REGUL-21 x CMT/4-280-115 2.2KW - Single inlet centrifugal fan direct driven ( LG-90)
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...