• Model:SDA400/4-1AC

Raptor SDA400/4-1AC

£ 520.92 (excl. VAT)

£ 625.10 (inc. VAT)

Raptor SDA400/4-1AC

The Raptor SDA is a short cased mounted axial fan and is normally mounted in ductwork applications.
It incorporates the Ziehl-Abegg FE2owlet aerofoil profiled impeller. Both strong and durable, this range also boasts low noise and increased efficiency levels.
Easy Installation
A fitted IP55 terminal box allows the fan to be positioned conveniently to incoming electrical inputs. Efficient Performance Aerofoil section, sickle shaped blades, with serrated trailing edges and winglets based on bionic insights.Corrosion resistance Specially treated against corrosion, powder coated with polyester epoxy paint in pastel beige (RAL 7032).
Controllability
A range of transformer voltage controllers used to provide five speed step control of single phase or three phase motors.
Energy saving
Extremely energy efficient as a result of EC technology, easy to commission, built in motor protection and compact in design to reduce casing sizes. AC external rotor motor variants also available.
Warranty
Each SDA has a 12 month warranty.
• 8 standard sizes from 250mm to 630mm
• Air volume flow rates up to 4.60 m³/s
• Static pressures up to 290 Pa
• Suitable for operating temperatures up to +70°C
• Available in AC & EC
Product Overview
RAPTOR SDA
Construction
Constructed from mild steel and suitably treated to ensure full corrosion protection. The guard is powder coated polyester epoxy paint finish in black (RAL9005). Fan casings are powder coated polyester epoxy paint finish in pastel beige (RAL 7032).
Motor
Motors are highly efficient, lightweight external rotor motors, insulated to Class F, with integral thermal overload protection.
Sizes 250-350 weatherproofed to IP44.
Sizes 400-630 weatherproofed to IP54.
All fans are suitable for use with a speed controller.
Impeller
The Ziehl-Abegg FE2owlet impeller has a unique serrated trailing edge which provides optimised flow and improved acoustics. The Aerofoil blades, complete with winglets, enable increased impeller efficiency.
Typical Applications
• Sports Halls
• Squash Courts
• Schools & Colleges
• Shops
• Retail Parks
• Commercial
• Kitchens
• Factories
• Industrial Units
• Warehousing
1 x Spigot plate - 250mm1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x Ducting 30 Degree Bend - 400mm1 x Duct Suspension Rings - 400mm2 x Elta 10 Amp Electronic single phase speed controller.1 x Transformer 5 Speed Controller - ATC1-4TK1 x ELTA - Single Phase Transformer 2amps1 x 5-Speed Controller for use with Elta SAX Classic Fans2 x Helios TSW 1.5 Amp Transformer speed controller3 x Electronic extractor fan speed controller - FSC 1.54 x Elta 6 Amp Electronic single phase speed controller with TK1 x EFSC-3N- Single Phase Speed Control4 x EC6H - Reversible Group Fan Electronic Controller1 x ELTA - Single Phase Transformer 8amps3 x Remote Timer Control - 13511 x Elta 2 Amp Electronic single phase speed controller.2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 3 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 16amps1 x Elta 6 Amp Electronic single phase speed controller.2 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 12amps1 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 4amps1 x COM-31 x EFSC-6N- Single Phase Speed Control1 x Run On Timer - 5s - 4hrs - RT5A1 x Helios ZNE Electronic Fan Overrun Timer1 x ELTA - Single Phase Transformer 10amps1 x Time Delay Unit - DT20B3 x Multi Input Run On Timer - 0 - 20min - CFCU2 x 7 Day Programmable TIMECLOCK1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3002 x Transformer 5 Speed Controller - ATC1-8TK2 x Push Timer Switch - ZA42 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans3 x Helios TSW MCB Amp Transformer speed controller2 x DEF-140T Inlet Guard for the CBT-100N4 x Helios TSW 10 Amp Transformer speed controller2 x Vent Axia ACM 150 inline mixed flow duct fan2 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Helios TSW 0.3Amp Compact Transformer speed controller2 x Helios TSW 3 Amp Transformer speed controller3 x Vent Axia ACM 125 inline mixed flow duct fan2 x CS2 Current Switch1 x RDS 7 Helios Transformer Controller With Motor Protection3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT2 x Transformer 5 Speed Controller - ATC1-10TK2 x MV-B Dual Switch for use with Helios HQW plate fans,2 x Insulated extract Plenum 6+12 x Insulated extract Plenum 8+11 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x MWS 3 – Transformer Controller With Motor Protection1 x ERR 20/1 Centrifugal inline fan3 x WS - Reversing Switch from Helios Fans1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Vent Axia SC5001 - Speed controller3 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Systemair Save Connect 2.0 Internet Module3 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT3 x MWS 1.5 – Transformer Controller With Motor Protection3 x Isolator Switch - ISOSW2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Vent Axia T-Series Controller1 x Two Speed Switch - REGUL-23 x Transformer (silent) speed controller - RE 3.0 Amp2 x REE-1 Electronic Speed Controller3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Helios TSW 7.5 Amp Transformer speed controller2 x Vent Axia ACM 100 inline mixed flow duct fan3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x ERR 31/1 Centrifugal inline fan4 x Helios HQW-630/4 - IP553 x CBA-60 Inlet Flange for CBT-601 x CBS-60 Outlet Flange for CSB/CBT-601 x ELM 25 EX Flexible Cuff for ERM 251 x Speed Controller - REB31 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x DEF-CBM-RE-7 - Protection Guard1 x Transformer Speed Control - RTRE- 1.5Amp2 x Helios HQW-200/2 - IP551 x CBM 9-9 550w 4P VR (Open Motor)2 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x Transformer Speed Control - RTRE- 7.0Amp2 x TG-K3/NTC10-01 - Duct temperature sensor1 x Helios HQW-200/4 - IP551 x Transformer speed controller - ATC1 - 1.5 Amps2 x Vent Axia ACM 200 inline mixed flow duct fan1 x Helios HQW-315/4 - IP551 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Transformer (silent) speed controller - RE 1.5 Amp1 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB101 x Transformer 5 Speed Controller - ATC1-12TK1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Envirovent G4 Filter - SL-G4/F71 x ELM 20 EX Flexible Cuff for ERM 221 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Speed Controller - REB51 x ELM 18 EX Flexible Cuff for ERM 181 x DDMP 09-09 3F 2130W M6A4 DG01 x Speed controller with Reverse - REB-1R1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer Speed Control - RTRE- 5.0Amp1 x Transformer Speed Control - RTRE- 12.0Amp1 x VTR 300 STD Filter Kit1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x Contactor Interface Station - CI91 x CBT-100N Centrifugal1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x QPTW 250C Acoustic Twin Fan with Controller
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...