• Model:REU7.0

REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost

£ 369.12 (excl. VAT)

£ 442.94 (inc. VAT)

Item number: 5007

A single-phase transformer which controls the fan speed by altering the supply voltage in five fixed steps. The steps are adjusted manually, using the control knob on the front of the unit. There are two control switches: one for higher fan speeds and one for lower fan speeds. Switching between the high and low settings is done by an external change-over contact, which could be a thermostat or a timer. The indicator lamp on the front shows when the transformer is in operation. The fuse may be reset from outside. The REU has a self-extinguishing thermoplastic casing. Supply voltage: 230V 50/60Hz.

NOTE! Fans with external thermal contact leads (TK) must always be connected to a motor protection device.

Only to be used with one fan motor at a time.
PDF Files


Data Sheet

1 x Inverter VFKB 271 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x REE-4 Electronic Speed Controller1 x 125mm Insulated 45 Degree Bend1 x Transformer speed controller - ATC1 - 4.0 Amps1 x MPS Weather Housing1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x MWS 1.5 – Transformer Controller With Motor Protection2 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 220x90mm to 160mm straight adapter1 x 1mtr Insulated Round Ducting - 125mm2 x 220x90mm x 1m Insulated Rectangular Duct1 x Helios - EUR EC - 0-10V control Panel1 x 2mtr Insulated Round Ducting - 125mm2 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Anti Vibration Duct Suspension Rings - 100mm1 x Etaline 355mm - E2-011 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole1 x HCFT/4-400mm plastic impeller plate fan1 x Impeller Side Guard - 315mm1 x RUCK MTP 30, Stepped Speed control1 x S-DT2DKT Two speed switch Y/YY1 x Vent Axia 2.5Amp Industrial Electronic Speed Controller1 x Acopel F400-560/1601 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Flakt woods ME 1.1 speed controller 1amp1 x Transformer speed controller - ATC1 - 16.0 Amps1 x 220x90mm Insulated Rectangular T-Piece1 x 204x60mm to 125mm Insulated Straight Adapter1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Helios TSW 12 Amp Transformer speed controller1 x EC6H - Reversible Group Fan Electronic Controller1 x Single Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Transformer speed controller - ATC1 - 8.0 Amps
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...