• Model:RTRD-7.0

RTRD - Three Phase Speed Controller - 7 Amp

£ 641.79 (excl. VAT)

£ 770.15 (inc. VAT)


Manual five-step transformer (with motor protection) - RTRD - Three Phase Speed Controller - 7 Amp

A three-phase transformer which controls the fan speed by altering the supply voltage in five fixed steps. The steps are adjusted manually, using the control knob on the front of the unit.

An integral motor protection device is included which cuts the supply voltage to the fan if the thermal contact in the fan motor is activated. The unit is reset by turning the knob to 0 for 10 seconds, after which the unit restarts.

Input terminals for room thermostat RT and frost protection thermostat FS cut supply voltage to the fan when the circuit is broken. When the frost protection thermostat FS breaks the circuit, it is reset in the same way as when the TK is triggered. Terminals are linked before delivery. The indicator lamp on the front shows that the transformer is in operation.

The transformer has 230V terminals for operating dampers, electric heater batteries or other external equipment. These terminals have no current when the transformer knob is in position 0, or when the TK or RT input is open. Supply voltage: 400V 50/60Hz.
PDF Files


RTRD 7 Speed Controller

1 x 220x90mm x 2m Insulated Rectangular Duct1 x Slotted channel1 x Male Ducting Connector - 450mm1 x 204x60mm 45 Degree Vertical Bend1 x JETLINE-125 - In Line Centrifugal Duct Fan1 x 18M - 80mm PVC flexible ducting1 x Duct Suspension Rings - 125mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Ducting 90 Degree Bend - 300mm1 x 220x90mm Insulated Rectangular T-Piece1 x RUCK MTP 30, Stepped Speed control2 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Ducting 90 Degree Bend - 80mm1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 2mtr Insulated Round Ducting - 125mm1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting2 x 1mtr Insulated Round Ducting - 125mm1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT500/4-3AC1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x HCFB/4-315mm plastic impeller plate fan1 x Ducting 90 Degree Bend - 100mm1 x 220x90mm x 1m Insulated Rectangular Duct1 x Spiral Duct Grille Termination - 450mm1 x Blast Gate (Manual) 125mm1 x Filter Box With F7 Grade Bag Filter - 250mm1 x Ducting 45 Degree Bend - 450mm1 x Elta Qube SQU Centrifugal Box Fan - SQU23/4-3HTS - Three Phase1 x MEV 160 & 300 Additional Spigots1 x Spiral Rapid Lock Clamp - 125mm1 x MRJ 250/350 S - protection guard from S&P1 x Classic SAX23/9AR Window/Wall Mounted1 x 125mm Insulated 90 Degree Bend1 x 125mm Round Condensation Trap1 x Shoed T Piece Un-Equal -450mm-315mm1 x Systemair AR 200E2 Sileo - IP441 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x Duct Termination with Mesh - 450mm1 x Ancillary Pack for SB-Biflow 400 model1 x Ancillary Pack for SLC-3551 x Ductwrap Insulation DW501 x Ancillary Pack for SLC-5601 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x AL 710 D4 mounting Feet (Pair)
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...