• Model:SAVE-VSR300

SAVE VSR 300 heat recovery unit

£ 1,537.00 (excl. VAT)

£ 1,844.40 (inc. VAT)

High efficiency variable speed rotary heat exchanger
• Moisture transfer function with automatic freezing regulation
• Energy efficient RadiCal-fans, with modern EC-technology
• Separate settings of supply and extract air flow
• Start-up wizard for easy commissioning
• Automatic change to summer operation (without heat recovery)
• Demand control regulation as standard by the built-in humidity sensor
• Inspection hatch on both sides
• Modbus communication via RS-485

Heat recovery unit designed for dwellings where ventilated area is up to apx. 240 m2.

The SAVE VSR 300 is double skinned, fully insulated and with complete control functions, high efficiency variable speed rotating heat exchanger with a moisture transfer function that regulates the rotation speed of the rotor due to freezing and moisture transfer back to supply air. Thermostat operated re-heater battery and filters. Energy efficient fans with EC motors will reduce energy consumption for transportation of ventilation air by apx. 50 % compared to traditional AC motors. Modern technology is contributing to a low SFP factor (Specific Fan Power) as well as an efficient design of the unit.

The unit will automatically alternate between normal operation with heat recovery and summer operation without heat recovery. This solution will also automatically recover chilled indoor air (from cooling).

Commissioning of the unit will be done from one or more CD panels. A start-up wizard will make the commissioning easier, which can avoid that the unit is running at wrong conditions. Symbols and text in the display will indicate chosen settings; Supply air temperature and fan speed. Commissioning of airflow on supply and extract, will be done at start-up but can be set from the menu settings as well. Timer-function for automatic change between day and night operation is integrated. Setting of filter period is also available. Alarm signal will indicate possible malfunctions.
The CD panel also has a user level for authorized installers and service personnel. The CD panel is connected to the unit by means of cable with quick connector (modular plug), on the side of the unit.
The unit is provided with outputs for control of external hot water or cooling battery and comes with built-in humidity sensor in extract air that enables demand control regulation with respect to moisture. It also has functions availably for external demand control that gives effective and economical operation. For instance, CO2, presence or humidity sensor.
The unit can be installed in upright position on the floor or horizontally on the ceiling.
Ceiling mounting kit is available as accessory.
The unit is delivered with supply air filter F7 and extract air filter G3. Option for G3 supply air filter is available.
CD panel and cable are also supplied with the unit.
1 x Ancillary Pack for SLC-6301 x Female Ducting Connector - 80mm1 x CBT-100N Centrifugal1 x Soler & Palau VFD-M inverter 10 amp IP541 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x Elta Unpodded Silencer 1D-560mm1 x Elta EC Electronic Controller1 x Ancillary Pack for SLC-5601 x Ancillary Pack for SLC-900 for SLC900/4B-3AC1 x Ancillary Pack for SLC-800 for SLC800/6A-3AC1 x Elta SLC500/4A-3AC - IP551 x Ancillary Pack for SLC-3151 x Ancillary Pack for SLC-710 for 4 pole Motors1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Helios PA10 Speed Potentiometer1 x Duct Suspension Rings - 450mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Male Ducting Connector - 160mm1 x Spigot plate - 160mm1 x Anti Vibration Duct Suspension Rings - 160mm1 x Spiral Duct Grille Termination - 160mm1 x Ducting T Piece Equal - 160mm1 x Ducting 90 Degree Bend - 160mm1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x Ducting 90 Degree Bend - 200mm1 x Spiral Ducting 3 Meters - 100mm1 x Spiral Ducting 3 Meters - 150mm1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 500mm1 x FSD-TD 225mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSAF315B2DX Silencer 355/81 x TecFire Intumescent Damper - Rectangular 350x350mm1 x FSD-TD 316 Grade Stainless Steel Fire and Smoke Damper, 700mm x 700mm, EASY FIX AF, GALV Case, GALV Blades, PM230v1 x FSD-TD 350 x 350 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 180mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 150mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Bellimo TF24S Actuator 24V1 x CFDM-125 Circular Twin Blade Fire Damper1 x TecFire Intumescent Damper - Rectangular 450x450mm1 x FSD-TD 550 x 200 Fire and Smoke Damper, S, GALV Case, GALV Blades, PM230-TF (SC)
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...