• UPC/EAN:8413893667083
  • Model:TCBBx2-500

TCBBx2-500 Contra Rotating Cased Axial - Single Phase - IP65 - Soler & Palau

£ 950.23 (excl. VAT)

£ 1,140.28 (inc. VAT)

TCBBx2-500 Contra Rotating Cased Axial fan from Soler & Palau - (Turboprop) - single phase - IP65

Develops high pressure for longer duct runs.

Often used in kitchen extract and greasy applications such as restaurants and takeaways.
Max Duty - 9950 m3/hr
Max Power Absorbed - 1,957 W
The TCBBx2 range of cylindrical cased axial fans are fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester paint finish. Used to be called TIPO.

Contra rotating TCBBx2 system with two complementary impellers allowing the duplication of the pressure with the same air volume, manufactured from die-cast aluminium.

All TCBBx2 models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors
~ All the motors are IP65, Class F insulation (1), equipped with thermal protection.
~ Single phase motors are variable voltage (for TCBBX2/4-630, only if the ambient temperature is up to 40 º C).
~ Three phase motors suitable for inverter control.
Electrical supplies:
~ Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
~ Three phase 400V-50Hz
~ Working temperatures from -40ºC up to 70ºC.

For Matching Flanges, Flexi Connectors, Protection Guards and Mounting Feet - Please Click HERE

PDF Files


TCBB/Tx2 Datasheet

Available Options

1 x KV 160 XL Sileo1 x Etaline 200mm1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 1500watt TC IP55 - Three Phase1 x CBM 7/7 72w 6P RE-VR1 x CBM 7/7 147w 4P RE-VR1 x HV STYLVENT Wall Kit Threaded Rods1 x Spiral end cap - 150mm1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x Jetflow-HIT Metal inline - 150mm1 x Metal Inline Fan - VENT-160NK1 x 204x60mm 90 Degree Vertical Bend1 x TD500 Mixvent - 160mm - TD500(5211302400)1 x 204x60mm 90 Degree Horizontal Bend1 x PRIO-160 EC 160mm Inline Mixvent Fan1 x PRIO-160 160mm Inline Mixvent Fan1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x Etamaster EM 150 L EC 01 inline mix-vent fan1 x TCDH-EXD Atex roof mounted Series1 x Metal Inline Fan - VENT-150NK1 x RS-160L1 x Etaline 150mm - EL 150L E2 011 x MTP 10, 10K, Speed control1 x Commercial Thermostat - TH161 x Etaline 250mm1 x CBM 7/9 4p 300W RE-VR1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 550watt CVR1 x CBM 9/7 4 Pole 373watt VR (Open Motor)1 x CBM 9-9 550w 4P VR (Open Motor)1 x CBM 9/7 6P 245W RE VR1 x CBM 9/9 4p 550W T RE-VR (Three Phase)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt C1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 6 Pole 245watt CVR1 x Time Delay Unit - DT20B1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Run On Timer - 5s - 4hrs - RT5A1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBM 9/7 4p 420W RE-VR1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Push Timer Switch - ZA41 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x Helios ZNE Electronic Fan Overrun Timer1 x Elta SLC450/4-3AC - IP551 x Elta Turboflow-TF - 450mm - Three phase1 x Elta SLC630/4B-3AC - IP551 x Elta Turboflow-TF - 500mm(A) - Three phase1 x Elta SLC315-1EC -IE5 Motor- IP551 x Vent Axia KAF Kitchen Extract Fan - 450mm - 2 Pole - Single Phase1 x Raptor SDA450/4-1AC2 x TXBR/4-450-C1 x Raptor SDA450/4-1EC1 x Vent Axia SABRE 450mm Cased Axial Fan (Single Phase)1 x Soler & Palau - TGT/6-1000-3/26 BLP 3kW (230/400V50Hz) IE3 V51 x ELTA - Three Phase Transformer 3amps
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...