• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x Stainless Steel IL Flanged Spigot-300mm1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x Clearance JPAK 100mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 125mm Insulated 45 Degree Bend1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Run On Timer - 5s - 4hrs - RT5A1 x DV-ROF-V-225 Roof mounted unit1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220x90mm x 1m Insulated Rectangular Duct1 x 1mtr Insulated Round Ducting - 125mm1 x Fresh Air control carbon filter - 125mm1 x Economy Airvent 100mm Fan with Timer & Shutter1 x Duct Termination with Mesh - 355mm1 x 220x90mm x 2m Insulated Rectangular Duct1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Economy Airvent 100mm Fan with Timer1 x Capacitor 6uf for use with the EBM D4E range1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Connection Lead for Td ecowatt & PIR sensor1 x 18M - 80mm PVC flexible ducting1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 220x90mm to 160mm straight adapter1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Economy Airvent 150mm Fan1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x FN091-SDK.6N.V7P21 x 220x90mm Insulated Rectangular T-Piece1 x *TD EVO-125 - Environmentally Friendly Inline Fan*1 x HV Wall Mounted Belt Drive Fan 1250mm 400V / 50Hz 1.1kW - Three Phase1 x KV DUO 400 EC1 x 2mtr Round Ducting - 125mm1 x 220x90mm Mounting Clip (Individual)1 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)1 x 204x60mm x 1m Low Profile Plastic Ducting - 1 Meter
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...