• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 131.69 (excl. VAT)

£ 158.03 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x D2E146-AP47-331 x G2E160−AL19−56 FLUE FAN1 x EBM-Papst D2E097-BK76-98 Double inlet1 x DIC 180 T LG (1IC1881) Forward Curved Blade Centrifugal Fan1 x W2S130-AA03-011 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Jetflow-HIT Metal inline - 100mm1 x DEF-1000-AN1 x ERM 18 protection guard - SGM 18 EX1 x JETLINE-100 - In Line Centrifugal Duct Fan1 x EX 140A-4C Mounting Kit for 160mm Duct1 x Ducting 45 Degree Bend - 1120mm1 x AR Sileo 500 Cased Axial Fan Guard - SG AXC/AM/AR 5001 x MV EC 100 Multivent1 x Ducting 15 Degree Bend - 1120mm1 x Impeller Side Guard - 560mm1 x Impeller Side Guard - 900mm1 x Impeller Side Guard - 800mm1 x Impeller Side Guard - 315mm1 x Impeller Side Guard - 400mm1 x DEF-900AN1 x FSD-TD 400 x 400 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x TD250 (110v) Mixvent - 100mm - TD2501 x TDID 4 - WOODS Auto Transformer (3 Phase)1 x Impeller Side Guard - 1000mm1 x Metal Inline Fan - VENT-100NK1 x Impeller Side Guard - 710mm1 x DEF-CBM-RE-7 - Protection Guard1 x Impeller Side Guard - 500mm1 x Impeller Side Guard - 630mm1 x RAE-2G - 2amp Single Phase Transformer Controller1 x Impeller Side Guard - 250mm1 x Ducting 30 Degree Bend - 1120mm1 x Female Ducting Connector - 1120mm1 x CBMT/Q 315-54 1 HEATER KIT1 x DEF-800AN1 x DEF-140T Inlet Guard for the CBT-100N1 x FSD-TD 400 x 350 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD Fire and Smoke Damper, 800mm x 200mm, EASY FIX AF, GALV Case, GALV Blades, PM230-TF1 x EX 140A-4C Mounting Kit for 125mm Duct1 x TDID 11 - WOODS Auto Transformer (3 Phase)1 x Impeller Side Guard - 450mm1 x Ducting 90 Degree Bend - 1120mm1 x TDID 2.5 - WOODS Auto Transformer (3 Phase)1 x Hydor HPA400/6-1A1 x HCFB/4-400mm plastic impeller plate fan1 x B-flow Impeller HCBB/T-355mm1 x Helios HQW-400/4 - IP551 x HCFT/4-400/H-BPN E20,P 0.25KW1 x FSD-TD 450 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Duct Split Rings (Pair) -1120mm1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x Spiral Ducting 3 Meters - 1120mm1 x FSD-TD 300 x 300 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FM-200 Flexible Connector Sleeve - 200mm1 x Impeller Side Guard - 350mm1 x EBM-papst Motorised Impeller - A6D800-AD01-011 x B-flow Impeller HCBB/T-450mm1 x FSD-TD 500 x 300 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x GB-KW 355 Drain pan for Giga Box Fans - 355mm1 x AR Sileo 400 Cased Axial Fan Guard - SG AXC/AM/AR 4001 x Male Ducting Connector - 1120mm1 x ADH E0-250 Flange - 0250 ADHE/RDHE1 x HRB/6-400-APN1 x B-flow Impeller HCBB/T-560mm1 x CBMT/Q 150-27 1 HEATER KIT1 x FSD-TD 450mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Mounting Feet 200-250 (pair) for ADH E0-02501 x 200mm EC BOX FAN - WOODS EC SINGLE FAN 2001 x Helios HQW-400/6 - IP551 x TDID 8 - WOODS Auto Transformer (3 Phase)1 x FSD-TD 550 x 250 Fire and Smoke Damper, S, GALV Case, GALV Blades, PM230-TF (SC)1 x London Fans Impeller - IMP710/160/10A/20°/28mm kw1 x Insulated extract Plenum 8+11 x LF-ME04F071LC3AC1 x Spigot plate - 160mm1 x 150mm EC BOX FAN - WOODS EC SINGLE FAN 1501 x CBMF 250-6,0 400V/2 Duct heater1 x Elta SPA400/4-1AC - IP541 x HRB/4-400-APN1 x FSD-TD Fire and Smoke Damper, 1000mm x 600mm, EASY FIX AF, GALV Case, GALV Blades, PM230-TF1 x Remote controller FLEX - for VEKO INT1 x Elta SCP400/4-3AC - IP551 x Elta Podded Silencer 1D - 630mm - Compact1 x CBMT/Q 315-120 3 HEATER KIT1 x Soler & Palau - HCBB/6-400/H - IP651 x Ducting T Piece Equal - 160mm1 x MUB/T-S 100 630D4 Centrifugal box fan, 120°C Continuous, Insulated1 x CBMT/Q 200-30 1 HEATER KIT1 x Hydor HPA400/4-1A1 x HRB/4-400-BPN1 x Soler & Palau - HCBT/4-400/H - IP651 x Elta SPA400/46-3AC - IP541 x EuroSeries (ESP) - Plate Mounted Axial Fans 400-141 x VEKA INT 2000/15.0-L1 EKO1 x MBE Electric Heater Battery - 500/18 T1 x HRT/4-400-BPN1 x CBMT/Q 125-12 1 HEATER KIT1 x CBMT/Q 315-30 1 HEATER KIT1 x Spiral end cap - 160mm1 x CBMT/Q 315-90 3 HEATER KIT1 x HCFT/4-400mm plastic impeller plate fan1 x Three Phase Transformer controllers - RMT 2.5 Amp
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...