• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Heat Resistant In-line Axial Fan - VOK 135/120 H1 x Systemair AR 200E2 Sileo - IP441 x Duct Tape - Silver - DTape1 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Single Phase1 x Soler & Palau TCBT/4-630/H - IP651 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -4pole1 x Flexible PVC Ducting - 220x901 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x Inline Hepa filter with housing & pre-filters1 x Ancillary Pack for SB-CYL 500 model1 x EQ641406 630mm Max Fan1 x Impeller Side Guard - 630mm1 x DHS 500E4 roof fan1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Spigot plate - 560mm1 x 220x90mm to 204x60mm Rectangular Adapter1 x Ducting 90 Degree Bend - 150mm1 x Belt Drive Cased Axial Fan - 630mm - L version1 x Raptor SDA630/6-1AC1 x External weather louvre Rectangular in RAL 9010 - 1200w x 800h - WL501 x External weather louvre 2728mmW x 1630mmH1 x Raptor SDA630/4-3EC1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Flanged Spigot - 125mm1 x MK 630 MOUNTING FEET (PAIR) for AMD Fans1 x 150mm Round Connector with Damper1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 -2pole1 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC35/401 x CBS-100 Outlet Flange for CBT-1001 x TD160 Mixvent - 100mm - TD160-N Standard1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x CBA-100 Inlet Flange for CBT-100
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...