• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x Gripple HVAC Hanger Range - Loop Fast - LF1 - 1mtr1 x Ducting 90 Degree Bend - 710mm1 x Hydor HPA400/6-1A1 x Soler & Palau TCBT/6-800/H - IP651 x 220x90mm x 1m Insulated Rectangular Duct1 x Raptor SDA450/4-1EC1 x Elta SCP400/4-3AC - IP551 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Soler & Palau TCBT/4-800/G - IP651 x Raptor SDA450/46-3AC1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Elta SLC450/4-3AC - IP551 x 2mtr Insulated Round Ducting - 125mm1 x Raptor SDA250/4-1AC1 x Belt Drive Cased Axial Fan - 450mm - L version1 x 220x90mm Elbow Plenum with 160mm Spigot1 x Soler & Palau - HCBT/6-400/H - IP651 x AMD 250/4 - Medium pressure axial fan 3-PH 400 V1 x Compact SCD450/4-1AC1 x Helios HQW-400/4 - IP551 x Elta Turboflow-TF - 450mm - Single phase1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x HRB/4-400-BPN1 x Soler & Palau TCBT/6-800/K - IP651 x 220x90mm Insulated Rectangular T-Piece1 x Soler & Palau TCBB/4-450/H - IP651 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Belt Drive Cased Axial Fan - 800mm - H version1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Soler & Palau TCBB/2-250/H - IP541 x U42K Screws for duct1 x Soler & Palau - HCBB/4-400/H -IP65 - BFLOW1 x Slotted channel1 x 125mm Insulated 90 Degree Bend1 x Floor Standing Cooler Fan- SRC-4501 x HRB/6-400-APN1 x Elta SLC450/4-1AC - IP551 x 204x60mm to 125mm Insulated Straight Adapter1 x 204x60mm x 1m Insulated Rectangular Duct1 x Galvanised Banding1 x Helios HQW-400/6 - IP551 x BDRAX 250-E2 Cased Axial External Rotor Fan1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x 125mm Insulated 45 Degree Bend1 x Elta Turboflow-TF - 450mm - Three phase1 x Soler & Palau TCBT/6-800/L - IP651 x Transformer (silent) speed controller - RE 1.5 Amp1 x Compact SCD450/4-3AC1 x CC-800-5.5kw1 x Elta SCP400/4-1AC - IP551 x HRB/4-400-APN1 x Elta SCP400-1EC - IP551 x Soler & Palau TCBT/4-800/L - IP651 x Hydor HPA400/4-1A1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Belt Drive Cased Axial Fan - 450mm - H version1 x HCFT/4-400mm plastic impeller plate fan
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...