• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x 220x90mm to 160mm straight adapter1 x DKEX 355-6 Centrifugal High Performance ATEX Fan1 x Soler & Palau TCBB/2-250/H - IP541 x FSD-TD 200mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Acoustic MiniBox Fan - MINI-BOX 1001 x Elta Turboflow-TF - 630mm - Single phase1 x EQ641406 630mm Max Fan1 x Soler & Palau TCBT/4-630/L - IP651 x Raptor SDA630/4-1EC1 x Soler & Palau TCBB/6-630/L - IP651 x Soler & Palau TCBT/4-630/H - IP651 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x 204x60mm to 125mm Insulated Straight Adapter1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 125mm Insulated Round T-Piece1 x 1mtr Insulated Round Ducting - 125mm1 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Synthetic Air Filter Media - 6mm x 2mtr x 20mtr Roll1 x 2mtr Insulated Round Ducting - 125mm1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 220x90mm x 2m Insulated Rectangular Duct1 x 125mm Insulated 45 Degree Bend1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x CBT-100 N (230/400V50HZ) LG270-EXDIIBT41 x CVAT/4-4000/400 ND 0.37Kw (230/400V50HZ) EXDIIBHT4 - ATEX RATED CABINET FAN1 x 125mm Insulated 90 Degree Bend1 x 220x90mm Insulated Rectangular T-Piece1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x KTEX 50-25-4 Fan (ATEX)1 x Rosenberg ATEX DKHM 355-4SW.110.5DF-E751 x 204x60mm x 1m Insulated Rectangular Duct1 x CBT-80N Centrifugal ATEX II 2G Exe II T31 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...