• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x CBT-80N Centrifugal1 x Trickle And Boost controller for use with the SLP EC Slimpak fans1 x Ducting Reducer Long - 1000mm to 900mm1 x CBT-100N Centrifugal1 x Spiral Ducting 3 Meters - 100mm1 x Soler & Palau TCBB/4-315/H - IP441 x WS - Reversing Switch from Helios Fans1 x VTR 300 STD Filter Kit1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm1 x Villavent BF VR700 E and DC STD Filter Kit1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x CBMT/Q 315-90 3 HEATER KIT1 x Transformer Speed Control - RTRE- 1.5Amp1 x Transformer 5 Speed Controller - ATC1-2TK1 x CBMT/Q 400-9 3 HEATER KIT1 x CBMT/Q 400-55 1 HEATER KIT1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x CBMT/Q 315-120 3 HEATER KIT1 x Vent Axia 2.5Amp Industrial Electronic Speed Controller1 x Etaline 150mm - EL 150L E2 011 x Transformer 5 Speed Controller - ATC1-12TK1 x Metal Washable Filter G2 Grade - 290 x 290 x 471 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x 125mm Round Wall Plate1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Transformer speed controller - ATC1 - 4.0 Amps1 x Spiral Ducting Additional Courier Surcharge1 x Male Ducting Connector - 400mm1 x Spare filter Set for Energi Sava 300 & 400 HR unit1 x BF VVX-200 - Villavent Filter1 x Transformer 5 Speed Controller - ATC1-4TK1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Air Trak Heater-100mm1 x Transformer speed controller - ATC1 - 8.0 Amps1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Ancillary Pack for SB-Biflow 315 model1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x Spigot plate - 400mm1 x Elta SLC400-1EC -IE5 Motor- IP551 x Spiral Ducting 1 meter - 400mm1 x ELTA - Single Phase Transformer 12amps1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Elta SLC400/4-1AC - IP551 x CBMT/Q 250-30 1 HEATER KIT
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...