• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x Ancillary Pack for SLC-900 for SLC900/6A-3AC and SLC900/6B-3AC1 x Ducting Y Piece - 100mm1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x 100mm Round Wall Plate1 x Flanged Spigot - 100mm1 x 150mm Round Connector1 x 110 x 54mm Rectangular Wall Plate1 x Ancillary Pack for SB-CYL 400 model1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x 204x60mm to 220x90mm Rectangular Adapter1 x 204x60mm x 1m Low Profile Plastic Ducting - 1 Meter1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x 204x60mm x 2m Low Profile Plastic Ducting - 2 Meter1 x 204x60mm Rectangular to 125mm Round Adaptor1 x menorca 900 cooker hood1 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x 204x60mm Flat Channel Clip (Pack of 5)1 x Spigot plate - 800mm1 x Ancillary Pack for SLC-900 for SLC900/4B-3AC1 x Ancillary Pack for SLC-5601 x 204x60mm Flat Channel Connector1 x Curved boot - 800mm1 x 204x60mm Double Airbrick Adapter1 x Ancillary Pack for SB-Biflow 250 model1 x CBM 7/9 6p 72W RE-VR1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Speed Controller - REB11 x Onda Cristal 900 Kitchen Extractor Hood1 x HA-600 SLIM Cooker Hood - Stainless Steel1 x 204x60mm 45 Degree Vertical Bend1 x Airbrick Grille with flange - 204 x 60mm1 x Ancillary Pack for SB-CYL 500 model1 x Elta SLC800/4A-3AC - IP551 x Spigot plate - 160mm1 x Kitchen Grille with Grease Filter - 300x300 - NO GRILLE BOX1 x Elta Unpodded Silencer Melinex 1D-500mm1 x Soler & Palau - HCBT/4-250/H - IP651 x Raptor SDA400/4-1EC
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...