• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x Spiral Ducting 1 meter - 710mm1 x Compact SCD450/4-3AC1 x Elta SCP450/4-1AC - IP551 x Elta SLC315/4-3AC - IP551 x 220x90mm Mounting Clip (Individual)1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC1 x CRHB/6- 315mm Roof mounted Fan - Horizontal discharge1 x Curved boot - 710mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x Ducting 45 Degree Bend - 710mm1 x Ducting T Piece Equal - 710mm1 x Female Ducting Connector - 710mm1 x Spigot plate - 710mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x Compact SCD450/4-1AC1 x CBMT/Q 150-27 1 HEATER KIT1 x Elta - HTS450/4-1 - Case Mounted Circulating Axial Fan1 x CBMT/Q 315-30 1 HEATER KIT1 x VA 12/2 T - High Temp Axial Fan,1 x Elta SLC450-1EC -IE5 Motor- IP551 x CBMT/Q 160-15 1 HEATER KIT1 x Helios VARW 450/4 - TK1 x Floor Standing Cooler Fan- SRC-4501 x Belt Drive Cased Axial Fan - 450mm - L version1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Soler & Palau - TGT/6-1000-3/26 BLP 3kW (230/400V50Hz) IE3 V51 x CBMT/Q 400-9 3 HEATER KIT1 x Raptor SDA450/4-1AC1 x CBMT/Q 500-17 3 HEATER KIT1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x CBMT/Q 100-06 1 HEATER KIT1 x Elta Turboflow-TF - 450mm - Single phase1 x Elta SLC450/4-1AC - IP551 x Air Trak Heater-100mm1 x CBMT/Q 200-30 1 HEATER KIT1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x CBMT/Q 200-54 1 HEATER KIT1 x VBK 65 - Water heating battery1 x Elta SLC450/2A-3AC - IP551 x AMD 250/4 - Medium pressure axial fan 3-PH 400 V
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...