SABRE Plate Mounted Sickle Fans - VSP25014 - Single Phase - 4 Pole
Max Duty - 972 m3/hr
Speed RPM - 1370
Single Phase - 220V to 240V / 50Hz
Max Power Absorbed - 0.05 KW
Suitable for operating temperatures up to +70°C
DBA @ 3m - 37 dB Inlet
This fan has a 2 year Guarantee.
The latest generation of the Vent-Axia Sabre® Plate Mounted Sickle fans incorporate the very latest FE2 Owlett impeller offering improved performance over the previous ranges with up to 7dB(A) reduction in sound and up to 15% improvement in efficiency ensuring the best available fan performance in its class. The advanced blade design, matched to a purpose designed external rotor motor ensures unrivalled reliability and controllability.
Design and Development
Using a combination of NASA research into wing performance and winglets, coupled with a study of bird flight, has enabled the development of the best available Sickle blade profile. By matching this to a purpose designed close fitting mounting plate ensures best use of this blade technology thereby reducing noise and improving the performance in plate axial fans.
Construction
Vent-Axia Sabre® Plate Mounted Sickle fans are based on an integrated impeller and external rotor motor design, which produces a very compact unit. Together with a specially designed bell mouth inlet and mounting plate, the complete fan is lightweight and ensures an excellent performance to sound level ratio.
The mounting plate is formed from a single sheet, protected with a tough epoxy paint finish. Inlet finger guards and motor supports are manufactured from steel rod, electro welded for extra strength. Sizes 250 to 710 finger guards give protection to BS 848 Part 5. Manufacture is controlled to BS EN ISO 9001 Standards.
Impellers
The impellers incorporate the latest in sickle blade aerofoil technology to ensure minimum sound and maximum performance. Impellers up to 400mm diameter are moulded from a composite polymer, impellers above this size are Aluminium. The motors and impellers are factory matched, statically and dynamically balanced to ISO 1940 part 1, Quality Class G.6.3.
Motors
The external rotor motors are specifically designed and styled for this range of fan. Ball bearings are greased for life. Sizes 315 - 710 motors are protected to IP54, against dust and moisture complying with BS EN 60529.
They have ribbed aluminium body castings for efficient cooling with Motor insulation to Class 'F' (from -40°C to + 70°C). Speed controlled sizes 450 to 710, 6 & 8 pole motors are only suitable for operating temperatures of up to 40°C.
Electrical
The Sabre® Plate Mounted Sickle fan range is available for either single phase 220-240V 50 Hz capacitor start and run or three phase 380-415V 50Hz. Motors are fitted with Thermal Overload Protection which should be wired into all controller circuits and into starter contactors to prevent motor damage due to overloading / overheating.
Form of Running
Plate mounted fans (ex-stock) are supplied for extract use (Form A running).
Performance
The fan performance, is in accordance with tests to ISO 5801.
Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with ISO 3744 Part 1. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at a reference level of 2 x 10-5Pa (20 micro-Pascal). The sound power level spectra figures are dB with a reference level of 10-12 Watts (1 pico- ~ watt).
To ensure minimum noise levels during speed control, either an auto transformer or eDemand inverter speed control is recommended.
Accessories
A full range of accessories is available with the Sabre® Plate Mounted Sickle fans:
- Electronic speed controllers
- Auto transformer speed controllers
- eDemand inverter speed control
- D.O.L. starters
- Louvre shutter
- Discharge guard
