• UPC/EAN:8413893265456
  • Model:Venturia-E

Venturia Whole House Ventilation

£ 196.54 (excl. VAT)

£ 235.85 (inc. VAT)

Extract system ensuring a continuous exhausting of air within residential homes through the extract ports located in several rooms (kitchens, toilets, bathrooms, etc) and air inlets located in the main rooms (utility, bedrooms, etc) allowing the input of fresh air.
Equipped with a centrifugal fan and fitted with a single speed, low energy consumption, at 130W.
Can be speed controlled.
230V-50Hz motor, IP44, class B insulation.
The Venturia extract system is designed for continuous operation.
Fitted with three anti-vibration cords for hanging in the attic or roof void to avoid radiated noise.
The four smaller spigots (80mm) are for general extract at about 54m3/hr, the central one (125mm) for more rapid extraction, eg. a bathroom or kitchen.
Download Specifications
1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x Ducting T Piece Equal - 355mm1 x Spiral Ducting 3 Meters - 180mm1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x 100mm Round 90 Degree Bend1 x Differential Pressure Switch - 20 - 300 Pa - IP651 x Atex Motor Protection Switch - U-EK230E EX1 x CS2 Current Switch1 x Differential Pressure Switch - 50 - 500 Pa - IP541 x CO2 Room Sensor - CO2-R1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x EC-Basic-T temperature1 x Male Ducting Connector - 180mm1 x Ducting 45 Degree Bend - 355mm1 x Flanged Spigot - 180mm1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Ducting 15 Degree Bend - 180mm1 x Ducting Y Piece - 355mm1 x Ducting 45 Degree Bend - 180mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Male Ducting Connector - 355mm1 x Anti Vibration Duct Suspension Rings - 355mm1 x Spiral Duct Grille Termination - 355mm1 x Spigot plate - 355mm1 x Spiral Ducting 1 meter - 355mm1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Flanged Spigot - 355mm1 x Female Ducting Connector - 180mm1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Desk fan 9 inch - SFG91 x Ducting 30 Degree Bend - 315mm1 x Elta SPA500/4-1EC - IP541 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 315mm Spigot1 x Pressed Ducting Saddle - 630mm1 x Positive Input Ventilation System - Wall Mounted Unit c/w Heater1 x Duct Mounted Filter Box - 450mm - M6 grade Bag filter1 x Ducting 45 Degree Bend - 315mm1 x DEF-900AN1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Impeller Side Guard - 800mm1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP55
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...