• Model:004045

HV Wall Mounted Belt Drive Fan 1250mm 220V to 240V / 50Hz 1.1kW - Single Phase

£ 899.00 (excl. VAT)

£ 1,078.80 (inc. VAT)


The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides high air output combined with minimal energy consumption.

Features and Benefits
• Extensively tested in agriculture
• Features a centrifugally operated backdraught shutter on the external side to retain building heat and mesh safety guard on the inside
• Additional Light baffle available to control internal Lux levels IP55
• Up to 50°C operating temperature
• All components available as spares for minimum downtime
• ErP compliant

Constructed from galvanised steel with a specially designed stainless steel impeller, these fans are extremely hard wearing and robust. The drive mechanism includes sealed for life maintenance-free ball bearings, which means low noise and vibration levels, perfect for use in livestock ventilation.

The HV range is supplied fully assembled with internal and external safety guards.
PDF Files


HV Wall Mounted Belt Drive Fan Series Specification Sheets

1 x Spigot plate - 315mm1 x 100mm Round Wall Plate1 x 220x90mm 45 Degree Horizontal Bend1 x TTT/4-560/L N 0,75KW (230/400V50HZ)EXEIIT3 VE Atex Unit1 x HRU Controller1 x MUB 016 200EC - Acoustic EC Box Fan1 x Helios GigaBox 630mm GBD 630/4/4 centrifugal1 x Elta SLC560/4A-1AC - IP551 x 125mm Wall Duct - 350mm1 x CBMT/Q 150-15 1 HEATER KIT1 x Ducting 30 Degree Bend - 200mm1 x ZAP 710-63 Plate axial fan1 x Anti Vibration Duct Suspension Rings - 200mm1 x Elta SCP710-1EC1 x Ducting T Piece Equal - 315mm1 x Spiral Ducting 3 Meters - 200mm1 x Elta SCP710/4/6-3AC - IP551 x CBMT/Q 315-30 1 HEATER KIT1 x Curved boot - 200mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x 125mm - 100mm Round Reducer1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x Ducting 90 Degree Bend - 315mm1 x CBMT/Q 400-55 1 HEATER KIT1 x CBMT/Q 100-06 1 HEATER KIT1 x Duct Quick Suspension Rings with Clasp - 200mm1 x Ducting T Piece Equal - 200mm1 x Female Ducting Connector - 315mm1 x Spiral Ducting 1 meter - 200mm1 x Ducting 90 Degree Bend - 200mm1 x CBMT/Q 160-15 1 HEATER KIT1 x Soler & Palau - HXTR/6-710/H - IP54 - BFLOW1 x Universal Pipe Fixing Clip1 x HRT/6-710/30-BQ E21 x Ancillary Sealing Band - 200mm1 x Ducting 15 Degree Bend - 200mm1 x Elta SPA710/4/6-3AC - IP541 x Flanged Spigot - 100mm1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Duct Termination with Mesh - 315mm1 x Ducting 30 Degree Bend - 355mm1 x CBMT/Q 125-12 1 HEATER KIT1 x Spigot plate - 200mm1 x Ducting 30 Degree Bend - 315mm1 x 100mm - 125mm Round Reducer1 x 125mm Round Wall Plate1 x HRST/6-710-24 BZ C Rotorex Sickle bladed fan1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x CBMT/Q 315-90 3 HEATER KIT1 x AirTrak Heater-315mm1 x Ducting 45 Degree Bend - 200mm1 x 100mm Round Connector1 x CBMT/Q 200-54 1 HEATER KIT1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Shoed T Piece Equal -200mm1 x Ducting Y Piece - 200mm1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x 100mm Wall Duct - 350mm1 x Flanged Spigot - 315mm1 x Ducting 30 Degree Bend - 450mm1 x HPA Heavy Duty Flexible Ducting1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x FAST-TRACK RANGE 75mm - Straight Connector1 x Singleflow SSDL315-1EC1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Elta Turboflow-TF - 560mm - Three phase1 x DS-2 2-Speed Switch (3 Phase)1 x GENIOX 11 Internal Mounted Unit1 x Soler & Palau TCBB/6-560/L - IP651 x DOL Starter with Isolator - Three phase1 x Elta Unpodded Silencer 1D-800mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...