• Model:006734

HV Wall Mounted Belt Drive Fan 1250mm 400V / 50Hz 1.1kW - Three Phase

£ 899.00 (excl. VAT)

£ 1,078.80 (inc. VAT)


The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides high air output combined with minimal energy consumption.

Features and Benefits
• Extensively tested in agriculture
• Features a centrifugally operated backdraught shutter on the external side to retain building heat and mesh safety guard on the inside
• Additional Light baffle available to control internal Lux levels IP55
• Up to 50°C operating temperature
• All components available as spares for minimum downtime
• ErP compliant

Constructed from galvanised steel with a specially designed stainless steel impeller, these fans are extremely hard wearing and robust. The drive mechanism includes sealed for life maintenance-free ball bearings, which means low noise and vibration levels, perfect for use in livestock ventilation.

The HV range is supplied fully assembled with internal and external safety guards.
PDF Files


HV Wall Mounted Belt Drive Fan Series Specification Sheets

Customers also purchased...

1 x HD Series Control Damper - 1000mm X 1000mm1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Lindab ILC 250 - Inline Tube Fan1 x SEL355/2-1AC1 x Ducting 30 Degree Bend - 1000mm1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator1 x Capacitor 20uf for use with the EBM D2E range1 x Motorised Volume Control Damper - 400mm1 x RSK450 - Back Draught Shutter1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x SPI-150 C Iris damper1 x KD 250 L1 Circular duct fan1 x HD Series Control Damper - 2300mm X 1000mm1 x 600-VP90SA-4P MOTOR EP90 0.75KW 4POLE ELTA101 x EKHR 280-2SW BCMI1 x KV 250 L Sileo1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Economy Airvent 100mm Fan with Timer1 x Soler & Palau TCBT/4-560/H - IP651 x Etaline 355mm E4 011 x Metal Inline Fan - VENT-355N1 x Soler & Palau TCBB/6-560/L - IP651 x Raptor SDA560/46-3AC1 x Belt Drive Cased Axial Fan - 560mm - L version1 x Elta SLC560/2-3AC - IP551 x TD4000 Mixvent - 355mm1 x Elta Turboflow-TF - 560mm - Single phase1 x 56Jm/16/4/5/32/1Ph Long cased axial1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x Elta SLC560/2-3AC with inverter Drive & APK Mounting Kit1 x Soler & Palau TCBT/4-560/L - IP651 x Belt Drive Cased Axial Fan - 560mm - H version1 x Soler & Palau TCBB/4-560/L - IP651 x 220x90mm x 1m Low Profile Plastic Ducting - 1 Meter1 x HQD 710/4/4 Plate Axial Fan (2.2kw)1 x Flanged Spigot - 355mm1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 -2pole1 x TCBT/4-400/H EXEIIT3 ATEX
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...