• Model:004041

HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase

£ 799.00 (excl. VAT)

£ 958.80 (inc. VAT)


The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides high air output combined with minimal energy consumption.

Features and Benefits
• Extensively tested in agriculture
• Features a centrifugally operated backdraught shutter on the external side to retain building heat and mesh safety guard on the inside
• Additional Light baffle available to control internal Lux levels IP55
• Up to 50°C operating temperature
• All components available as spares for minimum downtime
• ErP compliant

Constructed from galvanised steel with a specially designed stainless steel impeller, these fans are extremely hard wearing and robust. The drive mechanism includes sealed for life maintenance-free ball bearings, which means low noise and vibration levels, perfect for use in livestock ventilation.

The HV range is supplied fully assembled with internal and external safety guards.
PDF Files


HV Wall Mounted Belt Drive Fan Series Specification Sheet

1 x 110 x 54mm Flat Channel Connector1 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -4pole1 x HQD 315/2 EX - ATEX Rated Plate Axial Fan (2-pole)1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x *VORT HRW 30 MONO Evo - Single Room Heat Recovery Unit,1 x BDS 630/710 RA b/d shutter1 x BDS 200/250 RA b/d shutter2 x Soler & Palau - HCBT/4-800/H - IP551 x Soler & Palau VFD-T inverter 9 amp IP541 x VKS 355-500 Automatic shutter1 x JCA 560 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x BDS 400/450 RA b/d shutter1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Three Phase ATEX Compact axial fan - 400mm - compactATEX71 x Three Phase ATEX Compact axial fan - 500mm - HCBT-EX-4-501 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Three Phase ATEX Compact axial fan - 630mm - compactATEX61 x FlameProof Plate Axial Fan - Single Phase - 12 inches - Eexd IIC T4 -4pole1 x FlameProof Plate Axial Fan - Three Phase - 15 inches - Eexd IIC T4 -4pole1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -4pole1 x Three Phase ATEX Compact axial fan - 800mm - compactATEX81 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x Jetflow Silent SJMF-S 150-1EC1 x 150mm - 200mm Round Reducer1 x 150mm Round 90 Degree Bend1 x 150mm Round Connector1 x Ducting Reducers Short - 315mm-200mm1 x Spiral end cap - 100mm1 x Duct Mounted Filter Box With Paper G2 AND Metal Washable Filter - 250mm
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...