• Model:006732

HV Wall Mounted Belt Drive Fan 800mm 400V / 50Hz 0.75kW - Three Phase

£ 799.00 (excl. VAT)

£ 958.80 (inc. VAT)


The Hydor HV Wall Mounted Belt Drive shuttered fan unit is specifically designed to ventilate agricultural buildings and support the minimum ventilation requirements of livestock. The range provides high air output combined with minimal energy consumption.

Features and Benefits
• Extensively tested in agriculture
• Features a centrifugally operated backdraught shutter on the external side to retain building heat and mesh safety guard on the inside
• Additional Light baffle available to control internal Lux levels IP55
• Up to 50°C operating temperature
• All components available as spares for minimum downtime
• ErP compliant

Constructed from galvanised steel with a specially designed stainless steel impeller, these fans are extremely hard wearing and robust. The drive mechanism includes sealed for life maintenance-free ball bearings, which means low noise and vibration levels, perfect for use in livestock ventilation.

The HV range is supplied fully assembled with internal and external safety guards.
PDF Files


HV Wall Mounted Belt Drive Fan Series - Specification Sheets

1 x TUNE-R-250-3-M5 - Control Damper1 x SPI-200 C Iris damper1 x Female Ducting Connector - 180mm1 x Control switch - CR1501 x Elta Cased Axial Flange - 400mm1 x ASF 355-500 inlet flange DVS1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Duct Suspension Rings - 160mm1 x TUNE-R-200-3-M2 - Control Damper1 x TUNE-R-400-1-M3 - Control Damper1 x CBA-80 Inlet Flange for CBT-802 x TUNE-R-250-1-M2 - Control Damper1 x CCpro 40 (1CC9402) Long Casing Extension1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Isolator Relay Controller - 4420301 x TUNE-R-315-3-M0 - Control Damper (NO ACTUATOR)1 x Ducting 90 Degree Bend - 160mm1 x TUNE-R-315-3-M4 - Control Damper1 x Duct Suspension Rings - 300mm1 x ELTA - Single Phase Transformer 4amps1 x 220x90mm x 1m Insulated Rectangular Duct1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Duct Termination with Mesh - 150mm1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x HD-LL Series 600x6001 x Ducting 90 Degree Bend - 355mm1 x 100mm - 125mm Round Reducer1 x Roof Axial Cowl - RAW10001 x 204x60mm x 1m Insulated Rectangular Duct1 x Elta SCP450/4-1AC - IP551 x Ducting 90 Degree Bend - 1000mm1 x TUNE-R-250-1-M1 - Control Damper1 x 220x90mm Elbow Plenum with 160mm Spigot1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 315mm1 x TUNE-R-400-3-M0 - Control Damper1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Duct Mounted Filter Box - G4 Grade Panel - 125mm1 x Elta SCP315/4-3AC - IP551 x Flanged Spigot - 80mm1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm1 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x Soler & Palau - HXTR/6-800/H - IP541 x ACO-TK-ADS Auto Changeover Panel - Single Phase1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x TUNE-R-250-2-M1 - Control Damper1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x Helios DDF-200 Roof Cowl1 x Female Ducting Connector - 80mm1 x Speed Controller - REB11 x Spiral Duct Grille Termination - 150mm1 x EC-Vent Room Unit1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x CONTROL ECOWATT - Basic1 x TD Mixvent 1100/250 EEXEIIT31 x ELTA - Single Phase Transformer 16amps1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP315141 x Ancillary Sealing Band - 150mm1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x Elta SCP800/6/8-3AC - IP551 x HXP450/6-3 - 6 Pole - Three Phase1 x EM 315-E2M 01- Etamaster-3151 x EuroSeries (ESP) - Plate Mounted Axial Fans 315-121 x Elta SCP450/4-3AC - IP55
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...