125mm Insulated Round T-Piece
Our Price: £16.99
£20.39 inc. VAT
The Verplas Self-Seal Thermal is manufactured from Neopor® graphite impregnated expanded polystyrene (EPS) with infrared absorbers and reﬂ ectors, which signiﬁ cantly improves the thermal resistance of the material compared with standard EPS.
The Neopor® material is fully tested to meet the thermal conductivity requirements of BASF – EN13163, to assist with the prevention of condensation and is Flame Retardant to DIN 4102 B1.
Verplas Thermal Ducting has a minimum Density of 25 kg/m³ and therefore achieves a Thermal Conductivity of 0.03 W/mK, which at 20mm thickness, provides a minimum Thermal Resistance or R value of 0.666 m²K/W.
This exceeds the current UK Domestic Ventilation Regulation requirements of: Part F 2010 Domestic Ventilation Compliance Guide and NHBC Guidance Document Chapter 3.2. Which states that the Thermal Resistance of the insulating material should be equivalent to a minimum 25mm, with a thermal conductivity of 0.04 W/mK which gives a minimum Thermal Resistance requirement of 0.625 m²K/W.
The Verplas Self-Seal Thermal Ducting range has been designed to be installer friendly and utilises the patent pending push, click and lock mechanism. To ensure joint integrity and exceed the requirements set out in DW/143 Class A Leakage Test and DW/154 ductwork standards. The full range has also been independently airﬂ ow performance tested, by the Building
Research Establishment and the resulting performance curves are shown opposite. It is also compatible with our standard range of PVC Ducting and can be ﬁ xed with our PVC Coated Banding.
A comprehensive range of ﬁ ttings are available for each system size, including; Horizontal and Vertical bends, Tee-Pieces and Plenums and Ducting available in 1m and 2m lengths to provide a complete cost effective solution for individual installations, with minimum waste on site.
Pre-packaged in boxes of 6 for all ﬁ ttings and lengths of ducting, allows installers to carry multiple components to overcome tricky design changes on site.
All Self-Seal Thermal systems are compatible for use only with Verplas standard PVC ducts and ﬁttings.
For more technical information and Product Data Sheets or to arrange a call from your local sales representative, please visit our website at www.verplas.co.uk or contact our Sales Ofﬁ ce on 01202 825898.
Neopor® is a registered trademark of BASF SE