• Model:EVF-H

Positive Input Ventilation System - Wall Mounted Unit c/w Heater

£ 1,081.61 (excl. VAT)

£ 1,297.93 (inc. VAT)

Powered by an Ultra Low Watt Brushless Motor, the EnviroVent Wall Mounted Unit utilises the latest technology to ensure minimum energy consumption and long term trouble free life. Warm air accumulates at ceiling level. This air can be up to 7°C higher than the internal air at ground level. By introducing an almost imperceptible air supply into the dwelling, the EnviroVent Wall Mounted Unit helps to redistribute heat around the home and thus reduce space heating costs.

During the heating season significant energy is lost incurred by opening windows to reduce humidity and condensation. By installing an EnviroVent Wall Mounted Unit and providing fresh filtered air to the home humid air is displaced without opening windows and thus making significant savings to the occupier.

With 5 year on-going warranties and superior long life filters the unit achieves the lowest life-cycle costings. Once installed, there is no requirement for any maintenance within the first three years, after which the air quality filter should be cleaned or replaced. All other component replacement is carried out simply and quickly by exchanging the consumable items. The worn out components are then taken back to the factory to be recycled thus reducing the impact on landfill and saving millions of pounds in replacement costs.

Features
• Ultra Low Watt DC motor technology
• Integral Hours Run Meter
• Integral Pre-Heater
• 5 year Guarantee

Benefits
• Reduces/eliminates surface condensation
• Quiet operation
• Eliminates mould
• Stops streaming windows
• Removes musty odours
• Improves air quality
• Enhances heat distribution
• Benefits asthma sufferers
• BBA approved



Click to Download Specifications
1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Decor 200-C Bathroom Fan1 x AL 315 Mounting Feet (Pair)1 x Elta SLC400/4-3AC - IP551 x Helios HQW-200/4 - IP551 x Centrif Duo Plus - Timer1 x Decor 300-C Bathroom Fan1 x Ducting 45 Degree Bend - 710mm1 x ARIETT I - Centrifugal Bathroom Fan1 x EBB-250 T DESIGN Centrifugal Extractor Fan1 x EBB-250 S DESIGN Centrifugal Extractor Fan1 x Synthetic Air Filter Media - 6mm x 2mtr x 10mtr Half Roll1 x Duct Split Rings (Pair) -710mm1 x EB-100N T - Centrifugal Fan with Timer1 x Duct Fast Clamps - 400mm1 x Jetflow-HIT Metal inline - 150mm1 x RS-160L1 x Metal Inline Fan - VENT-160NK1 x ERM180EXE Bracket1 x KVK Slim 200 - Low profile Semi Acoustic Box Fan1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x Anti Vibration Duct Suspension Rings - 400mm1 x AL 400 Mounting Feet (Pair)1 x Male Ducting Connector - 400mm1 x Female Ducting Connector - 400mm1 x Flanged Spigot - 400mm1 x Spare filter pack for Energi Sava 210 HR unit1 x DA9/9 Feet1 x DA12/9 Feet1 x DA7/7 Feet1 x FSAF500FTX 500 mounting feet (Pair)1 x ELS-GU Flush Mounted Casing1 x GB-WK 250 Wall Bracket For Giga Box Fans - 250mm - 355mm1 x Ducting T Piece Equal - 400mm1 x MV EC 150 Multivent1 x DA7/9 Feet1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x DA9/7 Feet1 x AL 710 D4 mounting Feet (Pair)1 x FSAF450FTX 450 mounting feet (Pair)1 x FUM Mounting Foot for ERM 2501 x DA10/10 Feet1 x KV 160 XL Sileo1 x Ducting 90 Degree Bend - 400mm1 x Duct Suspension Rings - 400mm1 x Etaline 150mm - EL 150L E2 011 x 110 x 54mm Rectangular Wall Plate1 x 100mm - 125mm Round Reducer1 x Multiflow SMB450/4-3AC1 x Duct Suspension Rings - 150mm1 x HCFB/4-630mm plastic impeller plate fan1 x KVK Slim 160 - Low profile Semi Acoustic Box Fan1 x HRT/6-630/35-BZ E111 x Hydor HPA400/4-1A1 x Soler & Palau TCBT/4-800/H - IP651 x Etaline Max-Fan - 315mm - E2 011 x 110 x 54mm Flat Channel Connector1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...