• Model:EL1003

Vectaire Elegance Low Energy DMEV Fan Range

£ 119.00 (excl. VAT)

£ 142.80 (inc. VAT)

Vectaire Elegance Range is SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m) suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens runs continuously at pre-selectable choice of two lower speeds (fixed at installation)

Features
~ Speed 1 operates at 9.5 l/s (factory set)
~ Speed 2 operates at 13.8 l/s
~ 3 year warranty
~ All models fitted with anti-vibration gasket
~ All models incorporate cord which can be removed to allow other types of switching
~ Speed boosted to maximum (28.5 l/s) using integral pull cord or by: remote switch/light switch, PIR sensor or DRH240 (dynamic remote humidistat)

The design of the EL1003 allows intake of air around the whole perimeter patented anti-turbulence deflectors ensure very low noise levels and optimum performance energy saving ventilation extremely low running costs ensuring a low carbon footprint.

Specification
~ Shockproof, high quality technopolymer casing designed using latest wind tunnel technology and CFD simulations
~ EC induction motor with thermal protection
~ 30,000 hour life motors with maintenance free and long life ball bearings
~ Operates in ambient temperatures up to 40 Degree Celsius
~ Double insulated - no earth required
~ IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance
~ Part L1 2010 of Building Regulations for enhanced energy saving capability
~ Part F 2010 of Building Regulations for reliable, efficient ventilation
~ IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electromagnetic compatibility
~ CE marked
~ SAP Q eligible
~ Energy Saving Trust Best Practice Compliant

Elegance Range
~ EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
~ EL1003HDT - with comfort timer, humidistat and pull-cord
~ EL1003DTLV -3 speed, continuous running, with comfort timer, overrun timer and pull-cord LOW VOLT (SELV)
~ EL1003HDTLV - 3 speed, continuous running, with comfort timer, humidistat and pull-cord - LOW VOLT (SELV)

I've had 2 of these fans for 4 years now, and they are great. Reasonably quiet (and almost unnoticeable in constant running mode), and they are also quite strong to clear a foggy bathroom (although you can fog it up so it takes a while, but then the beauty of constant running is that it will ultimately clear). I've recommended them to,several friends now, and they've all been very happy.

Rated by Tim ******
PDF Files


Range Datasheet

Available Options

1 x MVEx 1,0 Atex Motor Protection Switch1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Soler & Palau - HCBT/4-800/H - IP551 x Flat Roof Terminal -OFT 5 - Ashphalt1 x Roof Axial Cowl - RAW450 in RAL9005 ( JET BLACK)1 x ILTM-500/560/630 - Motor Cover for ILHT Fans - 51337593001 x Duct Wrap Insulation - AWDW25mm1 x EBM Papst W3G630-GG97-011 x GB-WSG 450 External Weather Louvers for the Giga-Box Fans - 450mm1 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Ancillary Pack for SB-Biflow 250 model1 x Ancillary Pack for SB-CYL 630 model1 x Ancillary Pack for SB-Biflow 400 model1 x Rosenberg AKAD 630-4 A1 IP54 400V 50H1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x Purlin Box 1000 for RAW Cowls1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x 204x60mm 90 Degree Horizontal Bend1 x Classic SAX23/9A Window/Wall Mounted1 x Ductwrap Insulation DW502 x Elta Wall Cowl SWC25/311 x ACOAS/ AC/EC Auto Changeover 8Amp1 x MTS10- extractor fan 3 step switch1 x Acopel F400-280/1601 x CBMT/Q 150-15 1 HEATER KIT1 x Circular Ceiling Diffuser - TST 1251 x CBMT/Q 315-54 1 HEATER KIT1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Elta Powder Coated Cased Axial Flange - 630mm2 x Elta SLC355-1EC -IE5 Motor- IP551 x AKOR Mounting Plate for GD model(VIM166423)1 x 125mm Round Connector1 x Impeller Side Guard - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Round ceiling diffuser 200mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...